Concrete console (111): Sometimes, the reinforcement in the model was displayed after modifying the component although the reinforcement had been set to be invisible. This issue has now been fixed.

Seating with dowel (75), Two sided seating with dowel (76), Seating with dowel to flange (77), Two sided seating with dowel to flange (78), Concrete console (110): Previously, the tubes and anchors created by the component caused an error about an invalid polygon profile type. The property pane showed the profile as invalid even if the parts were displayed properly. This happened when the tubes and anchors were created as corbel parts. Now this issue has been fixed.

Two sided clip angle (143): Previously, weld preparation was created incorrectly in some cases. This issue has now been fixed.

Wall rails: When creating oversized bolt holes, only the necessary options are now enabled on the Bolts tab.

Wall rails: Now, setting the Create assembly option to No affects the component parts that are not welded or are welded with site welds. No assembly is created. Setting welds to Workshop will create assemblies based on welds.

LS Brace Col End Pl (24), TS Brace Col End Pl (25): Previously, the gusset was created with an incorrect shape in some cases when using one secondary part. This issue has now been fixed.

Metsec Std anti-sag bay (23): Previously, there were duplicate wire restraints at the same location. This issue has now been fixed.

Column with stiffeners (186): Previously, the bolt edge distance was not correct if the secondary part was cut to be beveled. This issue has now been fixed.

Bolted gusset (11): Previously, when using the component on both sides of one secondary part, welds were created with random directions. This issue has now been fixed.

End plate (144): Previously, fitting plates were not placed correctly in some cases. This issue has now been fixed.

Shear plate simple (35): Previously, there was a gap between the shear tab and the secondary part in some cases. This issue has now been fixed.
 

Bolted gusset (11): Previously, when using AutoDefaults, some welds were created with an incorrect setting. This issue has now been fixed.

Wraparound gusset cross (60): Previously, weld #1 was placed incorrectly in some cases. This issue has now been fixed.

Export drawings in 2D DWG, DXF, or DGN format: When you export drawings with rotated based points and you have set the XS_DWG_EXPORT_3D_MODEL COORDINATES advanced option to TRUE, the export now works correctly.

Rebar group dimensioning: Now it is possible to dimension the inclined bars in the rebar sets.

Custom grid labels: The grid labels created with the Grid labels command in drawings no longer disappear.

Drawing 2D Library: Details from older Tekla Structures versions now get recognized properly and no longer cause scaling issues.

There was an issue in the drawing property pane that caused dimension settings to be saved incorrectly, resulting in offset dimensions. This issue has now been fixed, and the dimension properties are now saved correctly, ensuring a correct dimension placement in drawings.

There was an issue with the NUMBER_IN_DRAWING attribute in rebar marks that occurred when there was a mixture of rebar sets and rebar groups with the same position number. This issue has now been fixed.

Document manager: Selecting and showing only drawings containing parts currently selected in the model is now faster.

Mark color in drawings: The default font color (Dark Green) is now applied to new mark elements when the mark has multiple colors.

Templates in marks: In the drawing property pane mark editor, when you double-click a template inside a mark, the template is now automatically selected in the list of templates in the Mark content - template dialog. Previously, the current template was not selected in the list.

When loading a property file in the drawing property pane when creating a new drawing object, the properties that had no value in the file used to disappear from the property pane. This issue has now been fixed and the properties no longer disappear.

Wall rails: Previously, when using the Equal or Maximum spacing types for brackets, an additional bracket that overlapped with the end bracket was created. This issue has now been fixed.

Tekla Model Sharing: Exception in Data Sharing Blob Storage on Download Progress has now been fixed.

The Assembly > Add to assembly command on the context menu no longer accepts reinforcement objects to be added to a cast unit or steel assembly. Reinforcement objects can only be added to a rebar assembly.

To add reinforcement objects to a cast unit or steel assembly, attach them to a part that belongs to the cast unit or steel assembly.

In DirectX rendered model views, precast concrete objects are no longer visualized with a white highlight that makes them appear shiny.

Previously, clip planes also cut the grid labels. This has now been fixed, and the grid labels are not cut.

Previously, if you defined a temporary snap reference point before specifying a split point for the Split command, the following commands did not work because Tekla Structures remained waiting for input. This has now been fixed, and the Interrupt command clears the Define temporary snap reference point state and Tekla Structures does not have to be restarted.

Bolts: Previously, when XS_DRAW_BOLTS_3D_IN_BOLT_LAYER was set to TRUE, bolts that had no bolt head diameter specified were created invisible. This made it difficult to spot the error. Now such bolts are shown in red indicating that there is an error in bolt definition.

Now, when you change the position of a nested custom component considerably, Tekla Structures continues to work normally. Previously, Tekla Structures might have stopped working.

Previously, clicking the Switch user button on the License server selection screen did not sign the user out before starting Tekla Structures again. This has now been fixed.

Previously, clicking the Switch user button on the Configuration selection screen did not sign the user out before starting Tekla Structures again. This has now been fixed.

DSTV/NC: Earlier, Tekla Structures might stop responding when exporting to DSTV through Open API. This issue has now been fixed.