Engineering library update - April 2022
Tekla Tedds engineering library update (April 2022 - version 24.01) is available in Tekla Downloads.
All Regions
Updates
| Library Access System | |
|---|---|
| TEDDS-6523 | Fixed all system set files (.las) which were missing from the original 2022 release. |
American Design
Updates
| Wood member design (NDS) | |
|---|---|
| TEDDS-6543 |
Adjusted minor axis properties of West Fraser LVL in datalist. |
| TEDDS-6443 |
UI speed improvements for _SectionLock = 1. |
| TEDDS-6442 |
Adjusted calculation call to eliminate unnecessary runs. |
| TEDDS-6421 |
Disable bearing check inputs when design reactions are zero. |
| TEDDS-6285 |
Summary table option now enabled even when users have selected no output. |
| TEDDS-6284 |
Overall design summary in preview window. |
| TEDDS-6265 |
Adjusted way sections are referenced within the ui. |
| TEDDS-6264 |
Updated layout of ui. |
| TEDDS-6263 |
Added section name variable. |
| TEDDS-6205 |
Summary table for all design sections now shown at top of output. |
| TEDDS-6201 |
Identify single section inputs in Tedds UI |
Australian Design
Updates
| Pad footing analysis & design (AS3600) | |
|---|---|
| TEDDS-4767 | Corrected undefined variable error, _OnlyMinShearReinfReqd. |
British Design
Updates
| Concrete industrial ground floor slab design (TR34) | |
|---|---|
| TEDDS-2073 | Fixed pass/fail statement in the user interface when a negative capacity is calculated. This is now shown as beyond scope. |
| TEDDS-3581 | Enhanced to include dimensions for the validity of the load type location, on the edge distance control description in the user interface. |
| TEDDS-6455 | Fixed the cracked to uncracked ratio check not appearing in the output. |
Canadian Design
Updates
| Anchor bolt design (CSA-A23.3) | |
|---|---|
| TEDDS-6437 | Amended factor for effective cross-sectional area of anchor. |
Eurocode Design
Product Bulletin April 2022 (PBT-2204-2)
Fixed a potentially un-conservative error affecting all calculations which allow steel channel sections to be selected, when the Tedds country setting is Finland, Sweden or Norway and specific UAP or UPN sections are used. For more detailed information please refer to Product bulletin April 2022 (PBT-2204-2).
Product Bulletin April 2022 (PBT-2204-1)
Crane gantry girder design (EN1993) - Fixed a potentially un-conservative error affecting the local stress calculations for underslung cranes. For more detailed information please refer to Product bulletin April 2022 (PBT-2204-1).
Product Bulletin March 2022 (PBT-2203-1)
Foundation analysis & design (EN1992/EN1997) - Fixed a potentially un-conservative error affecting the calculation of the passive resistance used in the sliding check. For more detailed information please refer to Product bulletin March 2022 (PBT-2203-1).
Updates
| Foundation analysis & design (EN1992/EN1997) | |
|---|---|
| TEDDS-6303 | Corrected calculation of horizontal force angle when negative forces are applied. |
| Pile analysis (EN1997) | |
|---|---|
| TEDDS-5985 | Fixed undefined variable error when selecting circular steel pile. |
| RC column design (EN1992) | |
|---|---|
| TEDDS-6472 | Enhanced to include new option to define the maximum number of iterations performed by the calculation to determine the column capacity. |
| Steel member design (EN1993) | |
|---|---|
| TEDDS-6398 | Bending and axial compression check was being applied to members in tension when using the Singapore national annex. |
| Steel to concrete simple connection design (EN1993) | |
|---|---|
| TEDDS-6279 | Fix bug not allowing rebar weld less than 60mm i=to be inputted. |
| Timber connection design (EN1995) | |
|---|---|
| TEDDS-6427 | Fixed incorrect load utilisation value shown in the ui and summary table for axially loaded fixings. |
| Timber member design (EN1995) | |
|---|---|
| TEDDS-6443 |
UI speed improvements for _SectionLock = 1. |
| TEDDS-6442 |
Adjusted calculation call to eliminate unnecessary runs. |
| TEDDS-6434 |
Enable National Annex options when _SectionLock = 1. |
| TEDDS-6285 |
Summary table option now enabled even when users have selected no output. |
| TEDDS-6284 |
Overall design summary in preview window. |
| TEDDS-6265 |
Adjusted way sections are referenced within the ui. |
| TEDDS-6264 |
Updated layout of ui. |
| TEDDS-6263 |
Allow design only sections to be selected by name rather than section reference. |
| TEDDS-6205 |
Summary table for all design sections now shown at top of output. |
| TEDDS-6201 |
Identify single section inputs in ui |