Tower 2 diagonal (89)
Bolts 2 diagonal braces to a tower leg.
Parts created
-
Use for
| Situation | More information |
|---|---|
|
|
Do not use for
Braces that clash.
Before you start
Create a tower leg and 2 diagonal braces.
Defining properties
Use the following tabs in the component dialog box to define the properties of this component:
| Tab | Contents | See also |
|---|---|---|
|
Picture |
Bolt gages that define the location of bolts that connect all parts. |
|
|
Picture2 |
Bolt gages that define the location of bolts in the bolt groups that connect:
|
|
|
Parts |
Dimensions that define the cuts in the vertical legs of the diagonal braces. |
|
|
General |
Connection properties, AutoDefaults and AutoConnection rule groups. |
|
|
Cuts d.1 |
Dimensions that define the cuts in the horizontal leg of the first brace picked. |
|
|
Cuts d.2 |
Dimensions that define the cuts in the horizontal leg of the second brace picked. |
|
|
Bolts |
Bolt properties. |
|
|
Check |
||
|
Analysis |
Information used in structural analysis |
Selection order
-
Tower leg
-
First brace
-
Second brace
-
Click the middle mouse button to create the component