MIS lists

You can export model data as a MIS list to be used in Manufacturing Information Systems (MIS).

The MIS export supports the following formats:

DSTV - The exported file contains the MIS information written in the DSTV format. The MIS list uses the information and format defined for the NC export part list.
KISS - We recommend using the FabTrol reports instead of the MIS export for exporting FabTrol data. The FabTrol reports are available for the Steel Detailing role in the US environment. If you do not use a suitable environment you may also contact your local support for the FabTrol files.

Note that plates will not export in the KISS format correctly.
EJE - US environment, Imperial role only. Structural Material Manager internally stores all dimensions in sixteenths. Its External Data Interface writes all dimensions, such as widths and lengths, except for Beam and Channel descriptions, in sixteenths of an inch. As an example the length 12'-8 7/8 is equivalent to 2446 sixteenths, which is calculated as (feet * 192) + (inches * 16) + (eighths * 2) = (12 * 192 + 8 * 16 + 7 *2).

Tekla Warehouse also provides additional EJE report templates used to pass data from Tekla Structures into EJE's Structural Material Manager. Download the templates and save the templates in a folder defined for the templates by the advanced option XS_SYSTEM. You can modify these report templates if you wish.
EPC - The EPC (Estimating and Production Control) module of SDS/2 requires multinumbering to be active.
Steel 2000

Export a MIS list

On the File menu, click Export > MIS.

The Export MIS dialog opens.
Select the file type from the MIS type list.
If you selected KISS or Steel 2000, define the additional options:
- KISS
  
  Enter the customer name in the Customer name box.
  
  Select the Full material list checkbox to add labor-related information to the list (for example, holes, welds, cambers, preliminary marks).
- Steel 2000
  
  Select the Export only shop bolts checkbox to include only workshop bolts in the list file.
Enter a name for the list file in the MIS list file box.

By default, the list file is saved in the model folder.

You can select another folder by clicking Browse....
Ensure that you have the selection switch Select objects in components selected. If you have the switch Select assemblies selected, Tekla Structures will create empty files.
Click Create all or Create selected to export the MIS list file.