You can add multiple drawings at one go to any one of your drawing logs. Use the Batch Insert command to add multiple drawings without attachments.

1. Open project management job and click Drawing Log.
2. In the context menu, select the drawing log.

   The All Drawing Logs option opens a drawing log that lists all drawings that you have added. If you select the All Drawing Logs option, you can add drawings to any drawing log.

3. Click the Drawing Log ribbon tab.
4. On the menu, select Batch Insert.

   The Insert Drawings dialog opens.

5. Go to the Add Range tab.
6. Enter the prefix and suffix of the drawing file names to be added.

   For example, if your project name was C23847, the revision number was 1, and the drawing number was 100, your drawing name could be C23487-100-r1.pdf. In this drawing name, the file prefix would be C23847-, and the file suffix would be -r1. Note that the file extension is not part of the file suffix.

   The File Prefix and File Suffix fields can be used to remove unnecessary text from the start and end of the file name respectively.

7. In the Start Number field, type the number of the first drawing that you want to add.
8. In the End Number field, type the number of the last drawing that you want to add.
9. Define any other properties for the drawings.
10. Click Add Drawings.