Offshore U (193)
Offshore U (193) creates a U-shaped connection to consecutive beams or built-up plate girders. You can control the length of the cuts and the welds.
Objects created
-
Welds
Use for
| Situation | Description |
|---|---|
|
|
Consecutive beams connected by a U-shaped connection. |
Selection order
-
Select the main part.
-
Select the first secondary part.
-
Select the next secondary parts.
You can select a maximum of five secondary parts.
-
Click the middle mouse button to create the connection.
Picture tab
The Picture tab shows the connection between two beams.
Connection
Parameters tab
Use the Parameters tab to define the connection geometry and welding.
Dimensions
| Description | |
|---|---|
|
1 |
Overlap length at the top flange of the first selected part. |
|
2 |
Overlap length of the second selected part. |
|
3 |
Overlap length at the bottom flange of the first selected part. |
Welds
| Option | Description |
|---|---|
 |
Default Welding is created. AutoDefaults can change this option. |
 |
Welding is not created. |
 |
Welding is created. |
General tab
Click the link below to find out more:
Design tab
Click the link below to find out more:
Analysis tab
Click the link below to find out more:
Welds
Click the link below to find out more: