1. Accueil
  2. Tekla Structural Designer
  3. Get familiar with Tekla Structural Designer
  4. Introduction to the Tekla Structural Designer user interface
  5. Overview of scene views
  6. Open and close scene views

Open and close scene views

Tekla Structural Designer
2023
Tekla Structural Designer

Open and close scene views

Open a Structure 3D view

  1. In the Project Workspace, go to the Structure tab.
  2. In the Structure tree, double-click Structure.
    (Alternatively, right-click and select Open view from the context menu.)
A Structure 3D view is displayed.

Open a Level 2D view

  1. In the Project Workspace, go to the Structure tab.
  2. In the Structure tree, click the + sign next to Levels.
    The existing levels are listed.
  3. Double-click on the required Level.
    (Alternatively, right-click and select Open view from the context menu.)
A Level 2D view is displayed.

Open a Frame 2D view

  1. In the Project Workspace, go to the Structure tab.
  2. In the Structure tree, click the + sign next to Frames.
    The existing Frames are listed.
  3. Double-click on the required Frame.
    (Alternatively, right-click and select Open view from the context menu.)
A Frame 2D view is displayed.

Open a Sloped Plane 2D view

Note:

Before you can view a 2D view of a sloped plane, you must create a sloped plane in your model.

  1. In the Project Workspace, go to the Structure tab.
  2. In the Structure tree, click the + sign next to Slopes.
    The existing Slopes are listed.
  3. Double-click the required Slope.
    (Alternatively, you could right-click and select Open view from the context menu.)
A Slope 2D view is displayed.

Open a Sub structure 3D view

  1. In the Project Workspace, go to the Structure tab.
  2. In the Structure tree, click the + sign next to Sub Structures.
  3. The existing sub structures are listed.
  4. Double-click the required sub structure.
    (Alternatively, you could right-click and select Open view from the context menu.)
A Sub structure 3D view is displayed.

Open a Sub model 3D view

  1. In the Project Workspace, go to the Structure tab.
  2. In the Structure tree, click the + sign next to Sub Models.
  3. The existing sub models are listed.
  4. Double-click the required sub model.
    (Alternatively, you could right-click and select Open view from the context menu.)
A Sub model 3D view is displayed.

Open a FAM 3D view

  1. In the Project Workspace, go to the Structure tab.
  2. In the Structure tree, click the + sign next to Floor Analysis Models.
  3. The existing FAMs at each level are listed.
  4. Right-click the required FAM, and from the context menu select Edit.
The FAM 3D view is displayed.

Open a Member 3D view

  1. In a Scene View, hover the mouse over the required member to highlight it.
  2. Right-click to open the context menu.
  3. Select Open Member View from the context menu.
A Member view is displayed.

Close views

Click x on the top right corner of the view tab.
Cela a-t-il été utile?
Précédent
Suivant