XS_EXPORT_CODEPAGE
Category in Advanced options dialog Export
Note: This advanced option is used in the old
drawing DWG/DXF export. The newer DWG/DXF export
is able to show the character sets correctly in
the exported drawings, and this advanced option is
not needed.
Tekla Structures sets the
codepage automatically so that exported files are displayed correctly. If the proper
codepage cannot be found, the codepage is set to ansi_1252 by default. You
can set the codepage manually by using this advanced option, which overrides the
automatic selection of the codepage in export. By default, this
advanced option is not set to any value.
This advanced option is user specific and the setting is saved in options.bin under the user folder, for example, in C:\Users\<user>\AppData\Local\Trimble\Tekla Structures\<version>\UserSettings. Restart Tekla Structures to activate the new value.
To set the advanced option to the required codepage, use one of the following values:
-
ascii -
iso8859-1 -
iso8859-2 -
iso8859-3 -
iso8859-4 -
iso8859-5 -
iso8859-6 -
iso8859-7 -
iso8859-8 -
iso8859-9 -
dos437 -
dos850 -
dos852 -
dos855 -
dos857 -
dos860 -
dos861 -
dos863 -
dos864 -
dos865 -
dos869 -
dos932 -
mac-roman -
big5 -
ksc5601 -
johab -
dos866 -
ansi_1250 -
ansi_1251 -
ansi_1252 -
gb2312 -
ansi_1253 -
ansi_1254 -
ansi_1255 -
ansi_1256 -
ansi_1257 -
ansi_874 -
ansi_932 -
ansi_936 -
ansi_949 -
ansi_950 -
ansi_1361 -
ansi_1200 -
ansi_1258