Splice connections

Tekla Structures
2022
Tekla Structures

Splice connections

Beam to beam

Example Description

Clip angle splice connection. Bolted/bolted, welded/bolted, welded/welded options.

Use Two sided clip angle (143).

Clip angle splice connection. One sided. Bolted/bolted, welded/bolted, welded/welded options.

Use Two sided clip angle (143).

Clip angle splice connection. Beams in differing planes.

Use Two sided clip angle (143).

Note:

To make a clip angle type splice connection, it is necessary to create a dummy main part to bolt through. The secondary parts are spliced.

Make the dummy plate 1/8" thick with special properties so that it can be filtered out when making drawings. Use the settings shown below on the Picture tab.

Example Description

Beam to beam web splice plate welded to main part/ bolted to secondary part.

Use Tab plate (33).

Beam to beam web splice plate welded to main part/ bolted to secondary part. Beams in differing planes.

Use Tab plate (33).

Beam to beam web splice plate welded to main part/ bolted to secondary part. Parts rotated.

Use Tab plate (33).

Beam to beam web splice plate bolted to both parts. Both parts in the same plane.

Use Column splice (42).

Beam to beam end plate splice.

Use Joining plates (14).

Beam to beam end plate splice. Parts of different depths.

Use Joining plates (14).

Beam to beam welded splice. Stair stringer to landing.

Use Cranked beam (41).

Note: Does not work on very shallow slopes, or beams in the same plane.

Beam to beam bolted end plate splice.

Use Cranked beam (41).

Note: Does not work on very shallow slopes, or beams in the same plane.

Beam to beam bolted end plate splice with haunch.

Use Cranked beam (41).

Note: Does not work on very shallow slopes, or beams in the same plane.

Beam to beam bolted end plate splice with haunch stiffener plate option.

Use Cranked beam (41).

Note: Does not work on very shallow slopes, or beams in the same plane.

Beam to beam welded splice, "Z" cut.

Use Offshore Z (192).

Beam to beam welded splice, "Z" square cut.

Use Offshore Z (192).

Column splice

Example Description

Column splice. Bolted to both parts. Both parts in the same plane.

Use Column splice (42).

Column splice. Bolted to both parts. Shim plates for differing profiles.

Use Column splice (42).

Column splice. Bolted to both parts. Lifting hole option.

Use Column splice (42).

Column splice with division plate and connection angles.

Use Column splice (132).

Was this helpful?
Previous
Next