Double Brace

Tekla Structures
2021
Tekla Structures
2020
Tekla Structures
2019i
Tekla Structures
2019
Tekla Structures
2018i
Tekla Structures
2018
Tekla Structures
Environment
Not environment-specific

Contents

Purpose and description
System Requirements
Using the Double Brace
Double Brace settings
Additional information

Purpose and description

A component to apply a double brace connection

System requirements

Tekla Structures.

Using the Double Brace

To use the component:
  1. From the component catalog select the Double_Brace component.
 
Image
DB_Thumb.jpg

  1. Select the parts in the model (3 No.), the selction order is always, the leg, the outside brace then the inside brace.
 
Image
DB_Input.jpg

 

Double Brace settings

Parameters Tab

Image
DB_Dialog.jpg


PropertyDescription
Image
DB_BM.jpg
The Gauge Line dimensions of the profiles are read automatically from the GaugeLines.dat file (in the model, firm or system folder).
These can be over written by the user if necessary.
Image
DB_fact.jpg
Option to specify a set dimension to the end of the brace, or select a factor. (user input number*hole diameter)
Image
DB_Switch.jpg
Option to switch the face from which the gauge line is shown. (dummy arrows in the model will show the face).
Normally this is from the back of the L profile but in some cases it may be shown from the leg instead, the user can use this option to over ride the Tekla default.
Image
DB_Cut.jpg
Option to turn off leg cut
Image
DB_Cut1.jpg

 

  Cut Tab

Image
DB_CutTab.jpg


 
Image
DB_CutCreate.jpg
Option to create a cut on the inside brace to avoid clashing with another brace.
Options to specify cut dimensions.
Image
DB_CutRadius.jpg
Option to specify a distance from the leg root radius that the brace will be cut.
 


Additional information

  • The Component is expecting equal L profiles, any other profile will give incorrect results.
这些内容是否有用?