2019 SP4: New features and improvements
2019
Tekla Structures
修正
缺陷数 | 开发领域 | 描述 |
---|---|---|
TSAC-1281 | Concrete components | In Wall layout and Floor layout, when a user-defined attribute value on the UDA/User defined tab is empty, the components now ignore these empty values. This lowers the risk of overwriting these UDAs. |
TSAC-2395 | Concrete components | In Wall layout, an error message is now shown in some situations to avoid Tekla Structures from crashing. This error message "Z0" is harmless but we recommend that you save your model when the message is shown. |
TSAC-2702 | Concrete components | Strip footing reinforcement (75): You can now create straight stirrup rebars. |
TSAC-2720 | Concrete components | Automated reinforcement layout - double tee beam (51): You can now use the Ignore cutouts in strand layout setting on the Attributes tab to ignore cutouts when counting the strand layout. |
TSAC-2862 | Concrete components | Beam reinforcement (63), Strip footing reinforcement (75), Corbel reinforcement (81) and Rectangular column reinforcement (83) now have a new U-shape stirrup available. |
TSAC-2896 | Concrete components | In Embedded anchors (8), you can now define a rounding value for anchor distances on the Placement tab. |
TSAC-2963 | Concrete components | Reinforcement mesh array in area (89) now creates the reinforcement mesh correctly for the defined polygonal area. Previously, the mesh was not created in some corners of the area and in some cases the mesh extended outside the area. |
TSAC-3132 | Concrete components | Wall layout dialog box has been fixed. Now it works more logically when modifying only the available properties of H, Z1, and Z0 (height, top and bottom level) on the General tab. |
TSAC-3180 | Concrete components | Rectangular column reinforcement (83) now creates intermediate bars between side bars when you have defined an equal number of symmetrical side bars, regardless of the symmetry option you have selected. |
TSAC-3272 | Concrete components | Concrete console (110): Previously, the option to cut extra secondary parts was applied to incorrect parts. This has now been fixed. |
TSAC-3362 | Concrete components | Wall layout elementation has been fixed. You can now use the current units (lbs or kg) as the By weight value in the same way as it has been possible for the maximum weight. |
TSAC-3366 | Concrete components | The Mesh bars and Mesh bars by area dialog boxes are now opened without an error message. |
TSAC-3475 | Concrete components | Mesh bars / Mesh bars by area: On the Detailing tab, the Create cuts around selected parts feature has been improved. Filter recognition in the list of filters has been improved and the selected filter is now visible when you reopen the component dialog box in the model. |
TSAC-818 | Concrete components | Mesh bars: You can now set the bar edge distance as a negative value. Note that this will only offset the bars. To get a fully offset mesh, set the cover thickness for the sides on the Bar end conditions tab to a negative value. |
TSAC-1069 | Steel components | Cold rolled sleeved (2): It is now possible to select the bolt size and bolt standard from catalogs. |
TSAC-1528 | Steel components | Cold rolled sleeved (2): The sleeve profile is now included in the bolted parts. |
TSAC-1903 | Steel components | Wraparound gusset (58): You can now define a clearance between the connection plates/clip angles and the gusset plate on the Gusset tab. |
TSAC-2807 | Steel components | Bolted gusset (11) now works in the same way in different Tekla Structures versions. |
TSAC-2990 | Steel components | In Simple clip angle 2 (82), the copes were previously created incorrectly causing problems with dimensioning in the drawings. This has now been fixed. |
TSAC-3010 | Steel components | Cranked beam (41): Vertical positioning of the bolt groups is now working correctly. |
TSAC-3054 | Steel components | Column with stiffeners (188): Shear tabs are now correctly placed when the main part is created from plates. |
TSAC-3177 | Steel components | Cold rolled overlap: Previously, when using user-defined profiles as secondary parts, the cleat was positioned incorrectly. This has now been fixed. |
TSAC-3185 | Steel components | In Railings (S77), stanchion skews are now created correctly for all stanchions. |
TSAC-3204 | Steel components | Bolted moment connection (134): Flange plate clearance now works correctly when the connection is connected to the main part web. |
TSAC-3253 | Steel components | In Stiffened base plate (1014), you can now define the material of extra profiles on the Extra plates tab. |
TSAC-3271 | Steel components | Column splice (132): You can now define the number of web bolts when using a division plate and angle profiles as the connection. |
TSAC-3295 | Steel components | Splice connection (77): Weld preparations for web plates are now created correctly and do not cause solid errors anymore. |
TSAC-3312 | Steel components | Joist to column, type 2 (163): Stabilizer angle bolts are now created when the secondary part is sloped. |
TSAC-3320 | Steel components | Cold rolled overlap (1): The cleat is now created correctly when using an L profile. |
TSAC-3323 | Steel components | Cold rolled sleeved (2): Bolt spacing is now correctly applied when the gap between the purlins has been specified. |
TSAC-3326 | Steel components | Seat detail type 1 (1033): If the system default value is not found, the default material is now correctly set from File menu > Settings > Options > Components. |
TSAC-3336 | Steel components | Create hole around part (92): Previously, when the profile length was shorter than the profile height, the cut was created incorrectly. This has now been fixed. |
TSAC-3411 | Steel components | Circular base plate (1052): You can now define the finish property for all parts. On the Anchor rods tab, you can now set the position of the grout to above or below. |
TSAC-3446 | Steel components | Tube gusset (20): Previously, the gusset plate was not created correctly in some cases. This has now been fixed. |
TSAC-2653 | Task Manager | Previously, changing the parent task of a task by decreasing the indent could cause some other tasks to be deleted in Task manager. This has now been fixed. |
TSAC-2797 | Import, export, interoperability | Layout manager: When importing from a layout point file, the name of the group that will be used is now always based on the name of the imported file. |
TTSD-14327 | Import, export, interoperability | IFC object conversion: Sometimes the whole model was converted as Item. This has now been fixed. |
TTSD-27454 | Import, export, interoperability | IFC object conversion: Curved walls were not converted in the correct orientation. This has now been fixed. |
TTSD-27907 | Import, export, interoperability | The IFC Property set definitions dialog box buttons now work better with Windows scaling. |
TTSD-28521 | Import, export, interoperability | IFC2x3 export: Surface treatments of rotated parts did not always export correctly. This has now been fixed. |
TTSD-28731 | Import, export, interoperability | IFC object conversion: Item conversion with almost exactly same geometry failed sometimes. This has now been fixed. |
TTSD-28845 | Import, export, interoperability | DWG drawing export: It is now possible to cancel the DWG drawing export/preview. |
TTSD-28931 | Import, export, interoperability | DWG drawing export: The DWG export stability has been greatly increased in cases of exporting many drawings at a time. |
TTSD-29135 | Import, export, interoperability | IFC object conversion: The IFC object conversion changes list shows object names again. |
TTSD-29283 | Import, export, interoperability | IFC export: Holes for bolts going through both faces of hollow section now exported to IFC more consistently, affecting also STEP and IGES exports done with Multi Converter extension. |
TTSD-29389 | Import, export, interoperability | IFC object conversion: Edge lines are now drawn again when you convert IFC items to native Tekla Structures items with the IFC object converter. |
TTSD-29494 | Import, export, interoperability | IFC2x3 export: The export now uses assembly name for steel parts as well. |
TTSD-29888 | Import, export, interoperability | IFC export: Previously, exporting a polybeam with a chamfer of over 180 degrees using 3 points did not work correctly. This has now been fixed. |
TTSD-29904 | Import, export, interoperability | DWG drawing export: Drawing DWG export now handles better situations where views are copied from another drawing with layouts. |
TTSD-30650 | Import, export, interoperability | Sometimes the reference model visibility eye icon state was wrong when you opened the reference model, and you needed to click the icon twice to get the reference model visible. This has now been fixed. |
TTSD-22294 | Templates and reports | Template Editor: Numbers that exceed the length field of a template are now correctly truncated with * symbols |
TTSD-27756 | Templates and reports | PDF reports had incorrect page breaks. This has now been fixed. |
TSAC-3263 | Drawings | Rebar group marking: Total number in cast unit is now correct for rebar sets. |
TSAC-3264 | Drawings | Template attributes created with the Rebar group dimensioning and Rebar group marking tools now work correctly in dimension marks. |
TSAC-3325 | Drawings | Rebar group dimensioning: Rebar group dimensioning no longer causes crashes. The crashes were caused by incorrect part bounding boxes and incorrectly counted view restriction boxes. |
TTSD-20373 | Drawings | In the Layout editor, moving several templates at once with the Move command now works more reliably. |
TTSD-24534 | Drawings | The center-to-center distance in bolt marks now works more reliably. |
TTSD-24666 | Drawings | Some objects are now drawn in lesser detail when zoomed out in drawings. This gives better performance when working in drawing mode. |
TTSD-26235 | Drawings | There were dimension points missing in copied and linked views. Now dimensions with points that do not have associativity can be copied and linked to another drawing. |
TTSD-26418 | Drawings | The advanced option XS_USE_CROSS_FOR_OPENING_SYMBOL caused an application error with some drawings. |
TTSD-26957 | Drawings | Previously the NUMBER_IN_DRAWING attribute was not working correctly with tapered rebar sets. This has now been fixed. |
TTSD-27732 | Drawings | The update of the curved dimensions in drawings now works more reliably. |
TTSD-28039 | Drawings | The CURRENT_DRAWING.TITLE property now correctly returns a value when used with Select from drawing in drawing view properties. |
TTSD-28665 | Drawings | Previously, in some cases, cast unit drawings could not be opened because graphical objects, such as rectangles, circles, clouds, and polygons, were not rendered correctly. This has now been fixed. |
TTSD-28986 | Drawings | Automatically created radius dimensions were incorrectly drawn the wrong way around. This has now been fixed. |
TTSD-29396 | Drawings | The TOP_LEVEL_BASEPOINT value was not displayed in drawing views when the value was zero. This has now been fixed. |
TTSD-29496 | Drawings | DWG drawing export: Exporting multidrawings as DWG files is now more reliable. |
TTSD-29639 | Drawings | Previously, moving part marks with leader lines could sometimes cause Tekla Structures to crash. This has now been fixed. |
TTSD-30329 | Drawings | Document manager could crash if a large number was entered into the search. This has now been fixed. |
TTSD-30731 | Drawings | Dragging tables in Layout editor has been improved: - Dragging tables is now smoother. - You can now drag several tables at one go. - When you drag tables, snapping is now more reliable. - When you drag tables, the tables now snap to offsets of 1 mm in metric environments, and 1/16" in the US imperial environment. - Previously, dragging was not possible in some cases. This has now been fixed. |
TTSD-27196 | Tekla Model Sharing | Previously, when a reference model was locked locally before read in, you had to reopen the model to update the reference model version. This has now been fixed. |
TTSD-30323 | Tekla Model Sharing | In Tekla Model Sharing, object locks have now been reinforced, so that users in different organizations can no longer accidentally unlock each others' objects or modify the privileges.inp file. |
TSAC-3344 | Reinforcement | In Rebar shape manager, the rule operand REVERSED was not previously available for curved/circular bars, and therefore it could not be used in shape definitions. This has now been fixed. |
TSAC-3345 | Reinforcement | In Rebar shape manager, some extra leg/bending rule operands were previously occasionally shown with short curved bars. These obsolete operands are not shown anymore. |
TTSD-28607 | Reinforcement | Previously, Tekla Structures could crash if a rebar set contained an end detail modifier defining a custom hook with zero angle. Sometimes such hook definitions could also prevent the model from being opened. This has now been fixed. |
TTSD-25146 | Modeling | When creating construction arcs and circles, free snapping (to any position) is now always forced on the current plane. |
TTSD-27047 | Modeling | Previously, if there was a conflict in a multi-user model and you clicked Review in the conflict message dialog box, Tekla Structures showed an error message when you viewed the conflict log. Now the error message is not shown anymore in conflict situations. |
TTSD-28182 | Modeling | Previously, in some rare cases, numbering could cause a Tekla Structures model to crash. This could happen at least in the Australasian environment. Now this has been fixed. |
TTSD-28422, TTSD-25154 | Modeling | You can again create construction circles by center point and point on circle. Now when starting the construction circle command, you have 3 options to choose from:
|
TTSD-28434 | Modeling | Previously, a model with rebar sets could not be reopened after repairing the model if XS_DELETE_UNNECESSARY_INT_ARRAYS was set to TRUE . This has now been fixed. |
TTSD-28510, TTSD-29504, TTSD-30166 | Modeling | Earlier, when creating a view along the grid lines for rotated views, incorrect views were created. This has now been fixed. |
TTSD-28673 | Modeling | Previously, classifying some shapes as non-solids was not correct. Now these shapes are classified as solids. |
TTSD-28722 | Modeling | When you added a new grid line, or removed or dragged an existing grid line of a rotated rectangular grid using direct modification, the grid was not modified correctly. This has now been fixed. |
TTSD-28936 | Modeling | Empty values in the chamfer properties will now be saved as a length of 0 units. This fix also removes the crash that happened in place of the desired behavior. |
TTSD-28962 | Modeling | Previously, when you added a new grid line in a rectangular grid using direct modification, if the neighboring grid lines were located at fractional coordinates, the grid line was not added and the grid labels disappeared. This has now been fixed. |
TTSD-29032 | Modeling | In the Object Group - View Filter dialog box, the values in the Property column no longer disappear when entered with a space at the end of the value. |
TTSD-29098 | Modeling | When using a main part UDA value in the assembly or cast unit position, Tekla Structures erroneously showed the default value of the UDA. This has now been fixed. |
TTSD-29301 | Modeling | Previously, when you had selected all parts in a cast unit with the Alt key pressed and you had the Select components selection switch active, trying to deselect a custom component sub-assembly in the cast unit by clicking the sub-assembly with the Ctrl button pressed could cause Tekla Structures to crash. This has now been fixed. |
TTSD-29400 | Modeling | Earlier, when diagnosing models containing spiral beams with a 360-degree turn and no total rise, model inconsistencies were reported. When repairing such models, these spiral beams were removed from the models. This has now been fixed. |
TTSD-29673 | Modeling | Parts whose material is Formwork_undefined are no longer added to the pour unit when you use the Calculate pour units command. However, you can manually add these parts to pour units if the cast unit type is precast. |
TTSD-29820 | Modeling | Profiles with zero decimals (for example, C130X2.0) were not shown correctly in the model (their detailed shape was lost and did not contain roundings, for example). This applied to fixed profiles which were created from sketched profiles. Now this has been fixed. |
TTSD-30122 | Modeling | Views along grid lines were not created properly if the work plane was set to some other plane, for instance, when the work plane was rotated. This has now been fixed. |
TTSD-30193, TTSD-30430, TTSD-30389 | Modeling | Previously, creating views along the grid lines did not work correctly when the grid had a non-zero origin. This has now been fixed. |
TTSD-30736 | Analysis and design | Previously, the selected analysis part handle disappeared when moving the cursor in the view. This has now been fixed. |
TTSD-30763 | Analysis and design | Previously, moving an analysis node did not create the correct result when multiple parts were connected to the node. This has now been fixed. |
TSAC-2579 | Tools and components | Sometimes, it was not possible to open the Layout line dialog box by double-clicking the thumbnail image in the Applications & components catalog. This has now been fixed. |
TTSD-27198 | Tools and components | Previously, clash check could fail to detect clashes involving rebar sets with hooks. This has now been fixed. |
TTSD-27819 | Tools and components | Previously, rebar set modifiers and splitters were hidden in the custom component editor if the XS_REBARSET_SHOW_MODIFIERS_CREATED_BY_COMPONENTS advanced option was set to FALSE . This advanced option should only apply to component instances, not to the component editor. This has now been fixed. |
TTSD-28207 | Tools and components | Previously, there was an error when publishing a custom component in the Applications & components catalog when another component of a different type with the same name as the custom component already existed. This has now been fixed. |
TTSD-15532 | User interface | The availability of material, thickness and color properties according to the surface treatment types in the property pane has been corrected. |
TTSD-24055 | User interface | Side pane windows no longer move slightly to the left when floated. |
TTSD-25122 | User interface | Side pane windows now stay docked or floated when restarting Tekla Structures. In addition, clicking on a side pane window header will no longer immediately float the window. You need to slightly drag to detach it. |
TTSD-27237 | User interface | Sometimes, when you created a view, the work plane was moved to the model origin. This has now been fixed. |
TTSD-27766 | User interface | The work plane was sometimes moved to the model origin when the view was created of the selected objects. This has now been fixed. |
TTSD-28663 | User interface | Previously, when you modified a UDA that did not affect numbering by using the property pane, Tekla Structures still considered the model object as needing renumbering. Now this does not happen anymore. |
TTSD-28885 | User interface | Previously, the work plane was set to the model origin when creating default views. This has been fixed and the work plane now remains in the previously set location. |
TTSD-29273 | User interface | Earlier, it was not possible to add rectangular or radial grid and grid plane UDAs to the property pane. This now has been fixed. |
TTSD-29328 | User interface | Rebars are now visualized correctly also when they are very far away from the model origin. |
TTSD-29452 | User interface | In some rare cases when dragging a table in Layout editor, the Tekla Structures user interface was no longer responding. This has now been fixed. |
TTSD-29794 | User interface | Model view visualization with DirectX rendering has been improved for reinforcing bars, handles, and stick representation:
|
TSAC-2527 | Import, export, interoperability (steel) | NC files: Skew cuts were not created well when were at a certain angle. This has now been fixed. |
TSAC-1225 | Import, export, interoperability (concrete) | HMS Export: Added new functionality to include slab cross bar reinforcement in the export. |
TSAC-3219 | Import, export, interoperability (concrete) | Export Unitechnik (79): There is a new option for the Export project coordinates setting on the SLABDATE block data specification tab. Use the new Yes, special variant A option to export Unitechnik files that are compatible with the IDAT stacker software. The new option is only available for the 5.2b version of Unitechnik. |
TSAC-3357 | Import, export, interoperability (concrete) | Export Unitechnik (79): On the Reinforcement tab, you can now select to export braced girders within the STEELMAT block. By default, the braced girders are exported outside of the STEELMAT block. |
TSAC-3418 | Import, export, interoperability (concrete) | Export EliPlan file (68): Hollow core slab thickness is now read from the profile instead of the geometrical thickness (in case the complete top or bottom face is cut). |
TSAC-3447 | Import, export, interoperability (concrete) | Export EliPlan file (68): All geometrical data with the Plotter and Pieces blocks are now exported rounded to the closest millimeter in metric environments. |