Axial capacity (section) (Columns: AS 4100)

Tekla Structural Designer
修改时间: 3 10月 2019
2024
Tekla Structural Designer

Axial capacity (section) (Columns: AS 4100)

The (section) axial capacity check is performed according to AS 4100 clause 6.1 for axial compression, or Clause 7.1 for axial tension, using the gross cross-section area for An in both cases.

Note that member (axial compression) capacity is a buckling check and as such is considered under the heading Compression buckling resistance (Member capacity under axial compression).

这些内容是否有用?
上一步
下一步