Member characteristic, construction and fabrication properties

Tekla Structural Designer
2021
Tekla Structural Designer

Member characteristic, construction and fabrication properties

The following table lists the available permutations of characteristic, construction and fabrication for each material type.

 
Material Characteristic Construction Fabrication Notes
Concrete Beam Concrete beam Cast-in-place  
Post tensioned Not designed
Precast Not designed
Coupling beam Cast-in-place

Coupling beams are the only beams considered by the Assisted core function.

If you set the Construction as a Coupling beam when part of a core, you have made an engineering decision that you are satisfied the section is sufficiently stiff to provide rigid section behavior - Tekla Structural Designer does not check for this.

Column Concrete column Cast-in-place  
Precast Not designed
Analysis Element Not applicable Not applicable Not designed
Steel Beam Non-composite beam Rolled  
Plated  
Westok cellular  
Westok plated  
FABSEC Not designed
DELETABEAM Not designed
Composite beam Rolled  
Plated  
Westok cellular Not designed
Westok plated Not designed
FABSEC Not designed
DELTABEAM Not designed
Column Non-composite column Rolled  
Plated  
Concrete filled Not designed
Concrete encased Not designed
Composite column Rolled Not designed
Plated Not designed
Brace Steel brace Rolled  
Steel joist Steel joist Steel joist Standard, Special or Girder types
Gable post Steel gable post Rolled  
Parapet post Steel Parapet post Rolled  
Truss member top Steel Truss member top Rolled  
Truss member bottom Steel Truss member bottom Rolled  
Truss member side Steel Truss member side Rolled  
Truss member internal Steel Truss member internal Rolled  
Analysis Element Not applicable Not applicable Not designed
Cold formed Beam Cold formed beam member Cold formed  
Column Cold formed column member Cold formed  
Brace Cold formed brace member Cold formed  
Gable post Steel gable post Cold formed  
Parapet post Steel Parapet post Cold formed  
Truss member top Steel Truss member top Cold formed  
Truss member bottom Steel Truss member bottom Cold formed  
Truss member side Steel Truss member side Cold formed  
Truss member internal Steel Truss member internal Cold formed  
Analysis Element Not applicable Not applicable Not designed
Cold rolled Beam Cold rolled beam member Cold rolled Not designed
Column Cold rolled column member Cold rolled Not designed
Eaves beam Eaves beam Cold rolled Not designed
Purlin Purlin Cold rolled Not designed
Rail Rail Cold rolled Not designed
Analysis Element Not applicable Not applicable Not designed
Timber Beam Timber beam Timber Not designed
Glulam Not designed
Structural composite lumber Not designed
Column Timber column Timber Not designed
Glulam Not designed
Structural composite lumber Not designed
Brace Timber brace Timber Not designed
Glulam Not designed
Structural composite lumber Not designed
Gable post Timber gable post Timber Not designed
Glulam Not designed
Structural composite lumber Not designed
Truss member top Timber Truss member top Timber Not designed
Glulam Not designed
Structural composite lumber Not designed
Truss member bottom Timber Truss member bottom Timber Not designed
Glulam Not designed
Structural composite lumber Not designed
Truss member side Timber Truss member side Timber Not designed
Glulam Not designed
Structural composite lumber Not designed
Truss member internal Timber Truss member internal Timber Not designed
Glulam Not designed
Structural composite lumber Not designed
Analysis Element Not applicable Not applicable Not designed
General Beam General material beam Not applicable Not designed
Column General material column Not applicable Not designed
Brace General material brace Not applicable Not designed
Analysis Element Not applicable Not applicable Not designed
这些内容是否有用?
上一步
下一步