Modify autodesign settings

Tekla Structural Designer
2020
Tekla Structural Designer

Modify autodesign settings

You can graphically modify autodesign settings of members and slabs from a Review View.

To modify the autodesign settings of a member or slab, do the following:

  1. Open a view and change the view regime to Review View.
  2. On the Review tab, either:
    1. Click Auto/Check Design, or,
    2. Click Show/Alter State and choose Autodesign from the Attribute list.

    Members and slabs are color coded according to their auto design setting.

  3. In the Properties window, select the appropriate mode.
  4. Do one of the following:
    • Click an individual entity to modify its auto design setting.
    • Hold down the left mouse button and drag a box from left to right to modify the auto design setting of all members within the box.
    • Hold down the left mouse button and drag a box from right to left to modify the auto design setting of all members within the box or cut by the box.
这些内容是否有用?
上一步
下一步