Use the Global Edit By Shape command to modify the shape, grade, dimensions, or length of all or multiple items.

1. In the Combining dialog box, click the Combining ribbon tab.
2. On the menu, select Global Edit > Global Edit By Shape.

   The Global Edit Filters dialog box opens.

3. Select a shape on the Shape drop-down menu.

   

4. To modify only specific types of items, select a filter type in the Type list, and click Select.

   The Filter dialog box opens.

5. Do one of the following depending on the filter type:
   • Click the arrow buttons to move the items that you want to modify to the Included list.
   • Type the maximum and minimum values for the items that you want to modify.
6. 
   
7. Click OK.

   To further limit the items that you want to modify, repeat steps 4 to 5.

8. Click OK.

   The Global Edit dialog box opens.

9. Select the properties that you want to update.

   You can also use Un-check All and Check Changed Fields to quickly clear or select checkboxes.

10. Click Update.

    The Confirm dialog box opens.

11. To confirm changing the properties of multiple items, click Yes.