Compatibele bestandsindelingen en software met Tekla Structures
In de volgende tabellen worden de uitwisselbaarheidsmogelijkheden van Tekla Structures weergeven.
De lijst Compatibele bestandsindelingen bevat de mogelijke bestandsindelingen voor het importeren en exporteren in Tekla Structures.
De compatibele Trimble-software, compatibele software met rechtstreekse koppelingen en compatibele software-lijsten bevatten software die compatibel zijn met Tekla Structures.
Een deel van de weergegeven software heeft een rechtstreekse koppeling met Tekla Structures. Er zijn in Tekla Warehouse veel rechtstreekse koppelingen beschikbaar. Als u een rechtstreekse koppeling naar een rekenmodelapplicatie hebt en u het rekenmodel van Tekla Structures met die rekenapplicatie exporteert, wordt het model in de desbetreffende applicatie geopend. Tekla Structures en de rekenmodelapplicatie moeten op dezelfde computer worden geïnstalleerd.
Compatibele bestandsindelingen
U kunt in Tekla Structures meerdere indelingen importeren en exporteren.
De volgende tabel geeft een groot aantal verschillende indelingen weer die u in Tekla Structures kunt gebruiken om gegevens te importeren en exporteren.
Als u enkele indelingen wilt gebruiken, moet u een extensie van Tekla Warehouse downloaden.
| Indeling | Importeren | Exporteren |
|---|---|---|
|
3D-afbeelding (.obj) |
X |
|
|
aSa (.TEK) |
Staafhoeveelheden en productiegeometrie voor uitsnijding en buiging |
|
|
Autodesk 3DS Max-indeling (.3ds) |
X |
|
|
Autodesk (.dwg) |
3D-geometrie, 2D-geometrie |
3D-geometrie, 2D-geometrie, tekeningen |
|
Autodesk (.dxf) |
3D-geometrie, 2D-geometrie |
3D-geometrie, 2D-geometrie, tekeningen |
|
Bentley ISM |
X |
X |
|
BIM Collaboration-indeling (.bcf) |
X |
X |
|
Blender-bestanden (.blend) |
X |
|
| BricsCAD (.ifc) |
X |
X |
|
BVBS (.abs) |
Staafhoeveelheden en productiegeometrie voor uitsnijding en buiging, net, tralieligger |
|
|
CIS/2 LPM5/LPM6-rekenmodel (.stp, .p21, .step) |
3D-geometry |
3D-geometry |
|
CIS/2 LPM5/LPM6-berekening (.stp, .p21, .step) |
3D-geometrie, attributen
|
3D-geometrie, attributen
|
|
CIS/2 LPM6-fabricage (.stp, .p21, .step) |
3D-geometrie, attributen |
|
|
CPIxml |
Hoeveelheden, materiaalgegevens, statusgegevens |
|
|
COLLADA (.dae) |
X |
|
| .csv | Geometrie van onderdelen en merken voor fabricage, attributen | |
|
DSTV (.nc, .stp, .mis) |
3D-analytische geometrie |
Onderdeelgegevens voor fabricage |
|
EJE |
X |
|
|
Elematic ELiPLAN, ELiPOS (.eli) |
Productiestatus en -datums |
Element- en materiaalhoeveelheden, productiegeometrie voor storten, plotten en uitsnijden, ontwerpstatus en opmerkingen |
|
EPC |
X |
|
|
Fabsuite (.xml) |
X |
X |
|
FabTrol Kiss (.kss) |
Modelgegevens, attributen |
|
|
FabTrol MIS Xml (.xml) |
X |
X |
|
Filmbox (.fbx) |
X |
|
|
GL Transmission Format (.glft) |
X |
|
|
High Level Interface-bestand (.hli) |
X |
X |
|
HMS (.sot) |
Element- en materiaalhoeveelheden, productiegeometrie voor storten, plotten, ontwerpstatus en opmerkingen |
|
|
IBB Betsy (.fa, .f, .ev) |
Element- en materiaalhoeveelheden |
|
|
IFC2x2 (.ifc) ** |
X |
|
|
IFC2x3 (.ifc) ** |
BIM-model, 3D-geometrie, 2D-geometrie, attributen |
BIM-model, 3D-geometrie, 2D-geometrie, attributen |
|
IFC4 (.ifc) ** |
X |
X |
|
IFCXML 2X3 (.ifcXML) ** |
X |
X |
|
IFCZIP 2x3 (.ifcZIP) ** |
X |
X |
|
Initial Graphics Exchange Specification (IGES) (.iges, .igs) |
X |
X |
|
LandXML (.xml) |
X |
|
|
Microsoft Project (.xml) |
X |
X |
|
Microstation (.dgn) |
3D-geometry |
3D-geometry |
|
Oracle Primavera P6 (.xml) |
X |
X |
|
Plant Design Management System (.pdms) |
X |
|
|
Polygon File Format (.ply) |
X |
|
|
SAP, Oracle, ODBC, enzovoort. |
X * |
X * |
|
SketchUp (.skp) |
3D-geometry |
3D-geometry |
|
Staad ASCII (.std) |
X |
X |
|
Steel Detailing Neutral Format (.sdf, .sdnf, .dat) |
3D-geometry |
3D-geometry |
|
Steel12000 |
X |
|
|
STEP AP203 (.stp, .step) |
3D-geometry |
|
|
STEP AP214 (.stp, .step) |
3D-geometry |
3D-geometry |
|
StruM.I.S |
X |
3D-geometrie, 2D-geometrie, tekeningen |
|
Tekla Collaboration (.tczip) |
X |
X |
| Tekla EPM (bijvoorbeeld Fabsuite) | Modelgegevens, attributen, tekeningen, NC-bestanden | |
|
Tekla-FabTrol-lijst (.xsr) |
X |
|
|
Tekla Structural Designer model (.tsmd) |
Rekenmodel |
Rekenmodel |
|
Tekla Structural Designer neutraal (.cxl) |
Rekenmodel |
Rekenmodel |
|
Tekla Structures-vorm (.tsc) |
X |
X |
|
Trimble Veldkoppeling (.tfl) |
X |
X |
|
Trimble LM80 (.txt, .cnx) |
X |
X |
|
TubeNC (.xml) |
Onderdeelgeometrie voor fabricage |
|
|
Unitechnik (.uni, .cam) |
Element- en materiaalhoeveelheden, procesgegevens, productiegeometrie voor prefab-bekisting, plotten, netlassen |
* Tekla OpenAPI gebruikt
**Raadpleeg voor een lijst met IFC-applicaties die door buildingSMART internationaal zijn gecertificeerd Gecertificeerde software.
Compatibele Trimble-software
De volgende tabel geeft de Trimble-software weer die compatibel is met Tekla Structures.
|
Trimble-product |
Importeren naar Tekla Structures |
Exporteren vanuit Tekla Structures |
|---|---|---|
|
3D+ |
Autodesk (.dwg) Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
DuctDesigner 3D |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
|
PipeDesigner 3D |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
|
Plancal |
IFC2X3 (.ifc) Autodesk (.dwg) Autodesk (.dxf) |
IFC2X3 (.ifc) Autodesk (.dwg) Autodesk (.dxf) |
|
SketchUp Make |
SketchUp (.skp) |
SketchUp (.skp) |
|
SketchUp Pro |
SketchUp (.skp) Autodesk (.dwg) Autodesk (.dxf) |
SketchUp (.skp) Autodesk (.dwg) Autodesk (.dxf) |
|
Tekla Field3D |
IFC2X3 (.ifc) |
|
|
Tekla Civil |
Rechtstreekse koppeling LandXML (.xml) |
Rechtstreekse koppeling IFC2X3 (.ifc) |
|
Tekla Collaboration |
Tekla Collaboration-bestanden (.tczip) |
Tekla Collaboration-bestanden (.tczip) |
|
Tekla Structural Designer |
Rechtstreekse koppeling (.tsmd) Neutral XML (.cxl) |
Rechtstreekse koppeling (.tsmd) Neutral XML (.cxl) |
|
Trimble Business Centre |
LandXML (.xml) |
|
|
Trimble Verbinden |
Rechtstreekse koppeling IFC2X3 (.ifc) |
Rechtstreekse koppeling IFC2X3 (.ifc) |
|
Trimble Field Link |
Trimble Veldkoppeling (.tfl) |
Trimble Veldkoppeling (.tfl) |
|
Vico Office |
Rechtstreekse koppeling |
|
|
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
||
|
IfcXML 2X3 (.xml) |
IfcXML 2X3 (.xml) |
|
|
Microstation (.dgn) |
||
|
Excel-werkbladen (.xls) |
Excel-werkbladen (.xls) |
|
|
Vico Schedule Planner |
Rechtstreekse koppeling .xml |
Rechtstreekse koppeling .xml |
Compatibele software met rechtstreekse koppelingen
De volgende tabel geeft de software weer die een rechtstreekse koppeling met Tekla Structures heeft om gegevens te importeren en te exporteren.
Er zijn in Tekla Warehouse veel rechtstreekse koppelingen beschikbaar.
De tabel geeft ook de bestandsindelingen weer die kunnen worden gebruikt als de rechtstreekse koppeling niet mogelijk is.
|
Product |
Bedrijf |
Importeren naar Tekla Structures |
Exporteren vanuit Tekla Structures |
|---|---|---|---|
|
ADConX |
ADConX |
Rechtstreekse koppeling |
|
|
AxisVM |
Inter-CAD Kft. |
Rechtstreekse koppeling |
Rechtstreekse koppeling IFC2X3 (.ifc) |
|
BeamMaster |
AGT |
Rechtstreekse koppeling |
|
|
Bentley Architecture |
Bentley |
Rechtstreekse koppeling (ISM) |
Rechtstreekse koppeling (ISM) |
|
Autodesk (.dwg) |
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
Bentley Structural |
Bentley |
Rechtstreekse koppeling (ISM) |
Rechtstreekse koppeling (ISM) |
|
Autodesk (.dwg) |
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6-berekening (.stp, .p21, .step) |
IFC2X3 (.ifc) |
||
|
IFC2X3 (.ifc) |
|||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
BricsCAD |
Bricsys |
.ifc |
.ifc |
|
CYPECAD |
Cype |
Rechtstreekse koppeling |
|
|
Diamonds |
Buildsoft |
Rechtstreekse koppeling |
Rechtstreekse koppeling |
|
Fabsuite |
Fabsuite |
Rechtstreekse koppeling KISS (.kss) |
Rechtstreekse koppeling KISS (.kss) |
|
FEM Design |
StruSoft |
Rechtstreekse koppeling IFC2X3 (.ifc) |
Rechtstreekse koppeling IFC2X3 (.ifc) |
|
IDEA StatiCa |
IDEA StatiCa |
Rechtstreekse koppeling |
|
|
Joints For Tekla |
Progetto Archimede |
Rechtstreekse koppeling |
|
|
Lantek |
Lantek |
Rechtstreekse koppeling |
Rechtstreekse koppeling |
|
LIRA-SAPR |
LIRA SAPR |
Rechtstreekse koppeling (standaard, Rusland) |
Rechtstreekse koppeling (standaard, Rusland) |
|
LIRA 10 |
LIRA SOFT |
Rechtstreekse koppeling (Rusland) |
Rechtstreekse koppeling (Rusland) |
|
Meridian Prolog |
Trimble |
Rechtstreekse koppeling |
|
|
Midas Gen |
MIDAS |
Rechtstreekse koppeling |
Rechtstreekse koppeling |
|
ModeSt |
Tecnisoft |
Rechtstreekse koppeling |
Rechtstreekse koppeling |
|
PEMA WeldControl |
Pemamek |
Rechtstreekse koppeling |
|
|
Pipelabo |
Maruhide |
Rechtstreekse koppeling |
|
|
PowerConnect |
Buildsoft |
Rechtstreekse koppeling |
Rechtstreekse koppeling |
|
PowerFrame |
Buildsoft |
Rechtstreekse koppeling |
Rechtstreekse koppeling |
|
ProCAM |
HGG |
Rechtstreekse koppeling |
Rechtstreekse koppeling |
|
Pro-Fit |
Zeman |
Rechtstreekse koppeling |
|
|
Qnect |
Qnect |
Rechtstreekse koppeling |
|
|
Raptor |
Peddinghaus |
Rechtstreekse koppeling |
|
|
RFEM |
Dlubal |
Rechtstreekse koppeling CIS/2 LPM6-rekenmodel (.stp, .p21, .step) IFC2X3 (.ifc) |
Rechtstreekse koppeling CIS/2 LPM6-rekenmodel (.stp, .p21, .step) IFC2X3 (.ifc) |
|
RISA 3D (Suite) |
Risa Technology |
Direct Link (Amerikaanse markt) |
Direct Link (Amerikaanse markt) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
||
|
CIS/2 LPM6-berekening (.stp, .p21, .step) |
CIS/2 LPM6-berekening (.stp, .p21, .step) |
||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
|
RisaConnection |
Risa Technology |
Rechtstreekse koppeling (VS, VK, Duitsland, Zweden, Noorwegen, China, India, Australië) |
Rechtstreekse koppeling (VS, VK, Duitsland, Zweden, Noorwegen, China, India, Australië) |
|
Robot Millenium |
Autodesk |
Rechtstreekse koppeling CIS/2 LPM6-rekenmodel (.stp, .p21, .step) CIS/2 LPM6-berekening (.stp, .p21, .step) |
Rechtstreekse koppeling CIS/2 LPM6-rekenmodel (.stp, .p21, .step) CIS/2 LPM6-berekening (.stp, .p21, .step) |
|
RSTAB |
Dlubal |
Rechtstreekse koppeling CIS/2 LPM6-rekenmodel (.stp, .p21, .step) IFC2X3 (.ifc) |
Rechtstreekse koppeling CIS/2 LPM6-rekenmodel (.stp, .p21, .step) IFC2X3 (.ifc) |
|
SAP2000 |
Computers & Structures, Inc. |
Rechtstreekse koppeling |
Rechtstreekse koppeling |
|
Rechtstreekse koppeling (ISM) |
Rechtstreekse koppeling (ISM) |
||
|
Autodesk (.dwg) |
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
||
|
SCIA |
Nemetschek |
Rechtstreekse koppeling |
Rechtstreekse koppeling |
|
Autodesk (.dwg) |
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
|
S-FRAME |
S-FRAME Software Inc. |
Rechtstreekse koppeling Autodesk (.dxf) |
Rechtstreekse koppeling Autodesk (.dxf) |
|
Sicam |
Controlled Automation |
Rechtstreekse koppeling |
|
|
STAAD.Pro |
Bentley |
Rechtstreekse koppeling |
Rechtstreekse koppeling |
|
Autodesk (.dwg) |
Autodesk (.dwg) |
||
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
||
|
Staad ASCII-bestand (.std) |
|||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
|||
|
ISM |
ISM |
||
|
Steel Projects PLM |
Steel Projects |
Rechtstreekse koppeling |
Rechtstreekse koppeling |
|
StruM.I.S |
StruM.I.S |
Rechtstreekse koppeling |
BSWX (.bswx ) |
|
Vacam |
Voortman |
Rechtstreekse koppeling |
Compatibele software
De volgende tabel geeft compatibele software van Tekla Structures weer en de indelingen die u vanuit Tekla Structures kunt importeren en exporteren.
Raadpleeg voor een lijst met IFC-applicaties die door buildingSMART internationaal zijn gecertificeerd Gecertificeerde software.
Raadpleeg voor meer informatie over de diverse import- en exporttools Importeren naar en exporteren uit Tekla Structures.
|
Product |
Bedrijf |
Importeren naar Tekla Structures |
Exporteren vanuit Tekla Structures |
|---|---|---|---|
|
3ds Max |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
|
3ds Max Design/VIZ |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
| A+ Software | ArmaPlus |
BVBS (.abs) Soulé (.xml) aSa (.TEK) |
|
|
Adapt |
Adapt Corporation |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
Advanced Steel, Advanced Design/Engineering |
Autodesk |
CIS/2 LPM5-rekenmodel (.stp, .p21, .step) IFC2X3 (.ifc) Steel Detailing Neutral Format (.sdf, .sdnf) |
CIS/2 LPM5-rekenmodel (.stp, .p21, .step) IFC2X3 (.ifc) Steel Detailing Neutral Format (.sdf, .sdnf) |
|
Allplan/Planbar |
Nemetschek |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
ANSYS |
ANSYS |
IGES (.iges, .igs) |
IGES (.iges, .igs) |
|
ArchiCAD |
Graphisoft/Nemetschek |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
IFCXML 2X3 (.xml) |
IFCXML 2X3 (.xml) |
||
|
IFCZIP (.ifczip) |
IFCZIP (.ifczip) |
||
|
Gecoördineerd aanzicht v1 |
Gecoördineerd aanzicht v1 |
||
|
ArchonCAD |
ArchonCAD Ltd. |
Autodesk (.dwg) Autodesk (.dxf) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) |
|
Armaor |
Ariadis |
BVBS (.abs) |
|
|
Artube |
Adige |
STEP (.stp, .step) IGES (.iges, .igs) IFC (.ifc) |
|
|
aSa Rebar |
Applied Systems Associates Inc |
aSa Rebar-bestand (.TEK) |
|
|
ASI |
Applied Science International LLC |
Staad ASCII-bestand (.std) |
|
|
AutoCAD |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
AutoCAD Architecture |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
IGES (.iges, .igs) |
Microstation (.dgn) |
||
|
AutoCAD Civil 3D |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
Microstation (.dgn) |
|||
|
LandXML-bestanden (.xml) |
|||
|
AutoCAD MEP |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
|||
|
AutoPLANT |
Bentley |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
AutoVue |
Oracle |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) STEP AP214 (.stp, .step) |
|
|
Aveva E3D |
AVEVA |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf, .sdnf, .dat) Op .ifc gebaseerde Tekla Collaboration-bestanden (.tczip) |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf, .sdnf, .dat) Op .ifc gebaseerde Tekla Collaboration-bestanden (.tczip) |
|
AviCAD |
Progress/EBAWE |
Unitechnik (.cam), BVBS (.abs) |
|
|
Bentley Building Electrical Systems |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
Bentley Building Mechanical Systems |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
Bentley Inroads |
Bentley |
LandXML-bestanden (.xml) |
|
|
Betsy |
IBB – Consultants & Engineers |
Betsy (.fa), Betsy (.f), Betsy (.ev) |
|
|
Cadmatic |
Cadmatic |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
|
CADmep+ |
MAP Software/Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
IFCXML 2X3 (.xml) |
IFCXML 2X3 (.xml) |
||
|
IFCZip (.ifczip) |
IFCZip (.ifczip) |
||
|
CADPipe |
AEC Design Group |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
CADWorx Plant |
Intergraph/Hexagon |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
||
|
CIS/2 LPM6-berekening (.stp, .p21, .step) |
CIS/2 LPM6-berekening (.stp, .p21, .step) |
||
|
CAESAR II |
Intergraph/Hexagon |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
CATIA |
Dassault |
Autodesk (.dwg) |
|
|
Autodesk (.dxf) |
|||
|
IGES (.iges, .igs) |
|||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
Concrete Pro |
LAP Laser GmbH |
Autodesk (.dwg) Autodesk (.dxf) Unitechnik (.cam) |
|
|
ConSteel |
ConSteel Solutions Limited |
ASCII |
|
|
Corobs |
Müller Opladen |
TubeNC (.xml) |
|
|
Daystar Software |
Daystar Software Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
|
DDS-CAD |
DDS |
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
|
Digital Project |
Gehry Technologies |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
ebos |
Progress/EBAWE |
Unitechnik (.cam) |
|
|
elcoCAD |
Hannappel SOFTWAR E GmbH |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
ELiPLAN |
Elematic |
ELiPLAN ( |
ELiPLAN (.eli) |
|
ELiPOS |
Elematic |
ELiPLAN (.eli) |
|
|
EliteCAD |
Messerli Informatik |
IFC2X3 (.ifc) Autodesk (.dxf) |
IFC2X3 (.ifc) Autodesk (.dxf) |
|
ETABS |
Computers & Structures, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
|
STEP AP214 (.stp, .step) |
|||
|
FabPro Pipe |
UHP Process Piping Inc. |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
FabTrol MRP |
FabTrol |
FabTrol MIS XML (.xml) |
FabTrol MIS XML (.xml) FabTrol KISS File (.kss) Tekla-FabTrol-lijst (.xsr) |
|
FactoryCAD |
Siemens |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
FelixCAD |
SofTec |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
Floor Pro |
Adapt Corporation |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
FormZ |
AutoDesSys, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
FXTube |
Mazak |
STEP (.stp, .step) IGES (.iges, .igs) IFC (.ifc) |
|
|
GSA |
Oasys |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
|
GT Strudl |
GT Strudl |
Autodesk (.dxf) CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
Autodesk (.dxf) |
|
HMS |
HMS |
HMS (.sot) |
|
|
HOOPS |
Tech Soft 3D |
Autodesk (.dwg) Autodesk (.dxf) |
|
|
Inventor |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
IronCAD |
IronCAD |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
iTWO |
RIB Software AG |
CPIxml (.xml) |
|
|
KeyCreator |
Kubotek |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
LEIT2000 |
SAA |
Unitechnik (.cam) |
|
|
LP-System |
Lennerts & Partner |
BVBS (.abs) |
|
|
MagiCAD |
Progman |
Autodesk (.dwg) IFC2X3 (.ifc) |
Autodesk (.dwg) IFC2X3 (.ifc) |
|
MasterFrame |
MasterSeries |
DSTV96 (.nc, .stp, .mis) |
DSTV96 (.nc, .stp, .mis) |
|
Maxon Cinema 4D |
Nemetschek |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
Maya |
Autodesk |
Autodesk (.dxf) IGES (.iges, .igs) |
STEP AP214 (.stp, .step) Autodesk Maya Autodesk (.dxf) |
|
Mesh Welding |
EVG (Filzmoser) |
Unitechnik (.cam) BVBS (.abs) |
|
|
Mesh Welding |
A.W.M. |
Unitechnik (.cam) |
|
|
Mesh Welding |
Progress/EBAWE |
Unitechnik (.cam) |
|
|
Microsoft Office Project |
Microsoft |
Project (.xml) |
Project (.xml) |
|
Microstran |
Engineering Systems Pty Limited |
Autodesk (.dxf) |
Autodesk (.dxf) |
|
Microstation |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
IGES (.iges, .igs) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
Multiframe |
Daystar Software Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdf, .sdnf) |
|
Nastran |
MSC Software Corporation |
Autodesk (.dwg) IGES (.iges, .igs) |
Autodesk (.dwg) IGES (.iges, .igs) |
|
NavisWorks |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) CIS/2 LPM6-rekenmodel (.stp, .p21, .step) IFC2X3 (.ifc) Microstation (.dgn) |
|
|
NX (Unigraph) |
Siemens |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
PDMS |
AVEVA |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf, .sdnf, .dat) Tekla Collaboration-bestanden (.tczip) |
Microstation (.dgn) Steel Detailing Neutral Format (.sdf, .sdnf, .dat) Tekla Collaboration-bestanden (.tczip) |
|
PDS |
Intergraph/Hexagon |
Microstation (.dgn) Steel Detailing Neutral Format (.dat) |
Microstation (.dgn) Steel Detailing Neutral Format (.dat) |
|
Peikko Designer |
Peikko Group Corporation |
Plugins |
Plugins |
|
PipeCAD |
Mc4 Software |
Autodesk (.dxf) |
Autodesk (.dxf) |
|
Plant-4D |
CEA Technology |
Autodesk (.dwg) Autodesk (.dxf) Microstation (.dgn) |
|
|
PRIAMOS |
GTSdata |
CPIxml (.xml) Unitechnik (.cam) |
|
|
Primavera |
Oracle |
P6 (.xml) |
P6 (.xml) |
|
ProStructures |
Bentley |
Autodesk (.dwg) |
|
|
Autodesk (.dxf) |
|||
|
Microstation (.dgn) |
|||
|
Steel Detailing Neutral Format (.sdf, .sdnf) |
Steel Detailing Neutral Format (.sdf, .sdnf) |
||
|
ISM |
ISM |
||
|
Pro/Engineer |
PTC |
IGES (.iges, .igs) STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
|
ProFit |
Progress/EBAWE |
BVBS (.abs) |
|
|
Prokon |
Prokon |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
|
PythonX |
Lincoln Electric |
DSTV |
|
|
RAM (CAD Studio) |
Bentley |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
||
|
CIS/2 LPM6-berekening (.stp, .p21, .step) |
CIS/2 LPM6-berekening (.stp, .p21, .step) |
||
|
ISM |
ISM |
||
|
Revit Architecture/MEP |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
Tekla Collaboration-bestanden (.tczip) |
|||
|
Revit Structure |
Autodesk |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6-berekening (.stp, .p21, .step) |
CIS/2 LPM6-berekening (.stp, .p21, .step) |
||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
Tekla Collaboration-bestanden (.tczip) |
|||
|
Rhinoceros |
McNeel Noord-Amerika |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
Geometry Gym-koppeling |
Geometry Gym-koppeling |
||
|
RinasWeld |
Kranendonk |
IFC2X3 (.ifc) | |
|
SACS |
Engineering Dynamics Inc. |
Autodesk (.dxf) Steel Detailing Neutral Format (.sdnf) |
|
|
SAFE |
Computers & Structures, Inc. |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
||
|
IGES (.iges, .igs) |
|||
|
SAM |
Bestech Limited |
Autodesk (.dxf) |
Autodesk (.dxf) |
|
Schnell Software |
Schnell Software |
BVBS (.abs) Unitechnik (staaf/net) |
|
|
SDS/2 |
Design Data |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
||
|
CIS/2 LPM6-berekening (.stp, .p21, .step) |
CIS/2 LPM6-berekening (.stp, .p21, .step) |
||
|
CIS/2 LPM6-fabricage (.stp, .p21, .step) |
|||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
Smart 3D (SmartPlant/SmartMarine) |
Intergraph/Hexagon |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
|
CIS/2 LPM6-berekening (.stp, .p21, .step) |
CIS/2 LPM6-berekening (.stp, .p21, .step) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
IFC2X3 (.ifc), met SmartPlant 3D |
|||
|
Solibri Model Checker/Model Viewer |
Solibri |
IFC2X3 (.ifc) |
|
|
SolidEdge |
Siemens |
Autodesk (.dxf) |
Autodesk (.dxf) |
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
SolidWorks |
Dassault |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
IFC2X3 (.ifc) |
IFC2X3 (.ifc) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
Soulé |
Soulé Software Inc. |
.xml BVBS (.abs) |
|
|
SPACE GASS |
SPACE GASS |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
CIS/2 LPM6-rekenmodel (.stp, .p21, .step) |
|
SpaceClaim |
SpaceClaim Co. |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
Steel Smart System |
Applied Science International, LLC |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |
|
StructureWorks |
StructureWorks LLC. |
Autodesk (.dwg) |
|
|
Autodesk (.dxf) |
|||
|
IGES (.iges, .igs) |
|||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
TurboCAD |
IMSI Design |
Autodesk (.dwg) |
Autodesk (.dwg) |
|
Autodesk (.dxf) |
Autodesk (.dxf) |
||
|
Microstation (.dgn) |
Microstation (.dgn) |
||
|
STEP AP203/AP214 (.stp, .step) |
STEP AP214 (.stp, .step) |
||
|
UniCAM |
Unitechnik |
Unitechnik (.cam, .uni) |
|
|
Unigraphics |
Siemens PLM Software |
IGES (.iges, .igs) |
|
|
Vernon |
Lincoln Electric |
TubeNC (.xml) |
|
|
VectorWorks |
Nemetschek |
IFC2X3 (.ifc) IGES (.iges, .igs) |
Autodesk (.dwg) Autodesk (.dxf) IFC2X3 (.ifc) |
|
Volo View |
Autodesk |
Autodesk (.dwg) Autodesk (.dxf) |
Autodesk (.dwg) Autodesk (.dxf) |