2021 SP9: Nuove funzioni, miglioramenti e correzioni importanti

Tekla Structures
2021
Tekla Structures

2021 SP9: Nuove funzioni, miglioramenti e correzioni importanti

Il Service Pack di Tekla Structures più recente e gli installer d'ambiente aggiornati sono disponibili in Tekla Downloads.

La marca del disegno contiene il testo caricato correttamente in tutte le lingue

In precedenza, i file delle impostazioni delle marche di disegno contenenti testo contenuto marca (<< Marca >>) non venivano caricati correttamente quando si utilizzava una lingua dell'interfaccia utente diversa. Questo problema è stato risolto e le marche salvate in una lingua possono essere caricate anche in qualsiasi altra lingua dell'interfaccia utente. Questa correzione si applica a tutte le marche delle parti, alle marche delle etichette vista, alle marche e alle etichette di quota e alle marche di quota barre d'armatura.

Esempi di posizioni del testo contenuto marca:

TTSD-50925

Aggiornamento dei modelli di riferimento selezionati

È ora possibile aggiornare i modelli di riferimento selezionati separatamente nella lista di modelli di riferimento utilizzando il pulsante di aggiornamento .

In precedenza, era possibile aggiornare solo tutti i modelli di riferimento.

TTSD-43246

Esporta file EliPLAN (68): Esportazione di sotto-materiali

È ora possibile esportare i sotto-materiali del materiale calcestruzzo utilizzando la nuova impostazione Includi sotto-materiali nella scheda Impostazioni dati. I sotto-materiali hanno una nuova sezione nel file di conversione dati denominata #SUBMATERIAL.

Per ulteriori informazioni sull'esportazione di sotto-materiali, vedere la sezione "Gestione dei sotto-materiali nell'esportazione ELiPLAN" in ELiPLAN.

TSAC-6502

Esporta Unitechnik (79): Esportazione di reti

Nella scheda Armatura l'opzione Esporta reti come Trasformato in pallet è stata rinominata in Trasformato in pallet (filo più lungo sull'asse X) ed è stata aggiunta una nuova opzione Trasformato in pallet (filo piegato sull'asse X) per esportare le reti ruotate nel piano del pallet con i fili piegati paralleli all'asse X del pallet.

TSAC-6604

Correzioni

Numero di difetto Area di sviluppo Descrizione
TSAC-1350 Concrete components

Wall layout opening has been improved so that only when you explicitly set the main part layer, then this layer is used as the input part to the Sandwich wall window component.

TSAC-4452 Concrete components

Geometry detailing strip: Closed polygon shapes now work correctly. Previously, placing the shape entirely or partially at the part edge did not work correctly when you selected a geometry for the shape.

TSAC-5961 Concrete components

Concrete console (110): The cut-out around T-shaped beams now follows the beam inclination correctly when set.

TSAC-6029 Concrete components

Concrete console (110): Cover thickness around T beams is now applied correctly.

TSAC-6314 Concrete components

Geometry detailing strip: The geometry detailing strip on the wall layout connector now again extends the details to the angled fitting of the wall layout connector.

TSAC-6385 Concrete components

Hollow core lifting loops: Updating now works correctly when inserted to a slab created by the Floor layout component.

TSAC-6419 Concrete components

Sandwich and double wall: The issues in the cast unit hierarchy of the outer shell have now been fixed.

TSAC-6429 Concrete components

Corbel reinforcement (81): Main bars, stirrups and traverse stirrups are now created properly also in situations in which the top face of the corbel is inclined (not horizontal).

TSAC-6466 Concrete components

Concrete connection (110): Sometimes, manually moving the component in the model broke the connection. This issue has now been fixed.

TSAC-6496 Concrete components

The mesh properties CUSTOM.MESH_WIDTH_NET and MESH_LENGTH_NET did not work correctly with meshes that were created as bend meshes but were flat (i.e. had only one leg).

TSAC-6537 Concrete components

Embedded anchors (008): Previously, some anchors could disappear when you had selected to create inclined anchors on the Input tab and the surface where the anchors were placed consisted of two perpendicular planes. This issue has now been fixed.

TSAC-6598 Concrete components

Floor layout: Previously, Floor layout's direct modification arrow and dimensioning did not work in certain cases. This issue has now been fixed.

TSAC-5957 Steel components

Truss (S78): Previously, when different offsets were specified for the top chord, the Joining plates (14) component used for the top chords connection was created in an incorrect position. This issue has now been fixed.

TSAC-5958 Steel components

Truss (S78): Previously, vertical beams were not created in some cases. This issue has now been fixed.

TSAC-6367 Steel components

Bracing cross (19): Previously, bolts were incorrectly placed when the main part was a bent plate. This issue has now been fixed.

TSAC-6451 Steel components

CMF Anti-sag system (53): Previously, it was possible to select members outside of the bay, which caused holes to be placed outside of the members. This issue has now been fixed.

TSAC-6517 Steel components

Circular base plate (1052): Previously, when you used a custom component for anchor bolts, the custom component was created at a skewed angle to the base plate. This issue has now been fixed.

TSAC-6534 Steel components

Bolted gusset (11): Previously, when the gusset plate was created as a rectangular plate, multiple welds were created in the same location. This issue has now been fixed.

TSAC-6538 Steel components

Two sided end plate (34): Previously, the bolting direction option did not work at all. This issue has now been fixed.

TSAC-6559 Steel components

2L Splice (63): Previously, the default values of weld sizes were not applied correctly. This issue has now been fixed.

TSAC-6565 Steel components

Railings (S77): Previously, the top rail at end stanchion fittings or bend was not created correctly when the stanchions were offset from the reference lines. This issue has now been fixed.

TSAC-6582 Steel components

Column with stiffeners S (187): Previously, the vertical distance between the first and last bolt and the edge of the plate was not correct when the secondary part was sloped. This issue has now been fixed.

TSAC-6583 Steel components

Shear plate full depth (37): Previously, in some situations an unwanted top haunch plate was created. This issue has now been fixed.

TSAC-6596 Steel components

Two sided end plate (142): Previously, safety connections were not created correctly for type C or U secondary beams. This issue has now been fixed.

TSAC-6629 Steel components

Gusseted cross (62): Previously, the horizontal bolt edge distance for brace bolts was not correct. This issue has now been fixed.

TSAC-6653 Steel components

Beam to beam stub connection (135): Previously, the stub web plate was not created correctly in some cases. This issue has now been fixed.

TSAC-6667 Steel components

Multiple stiffeners (1064): Previously, offsets between the edges of the main part stiffeners and flanges were not applied correctly in some cases. This issue has now been fixed.

TSAC-6668 Steel components

Partial stiffened end plate (65): Previously, the default value for stiffener part position and start number was not correct. This issue has now been fixed.

TSAC-979 Steel components

Railings (S77): It is now possible to maintain the same distance between the bottom rail and bottom of the stanchions.

TTSD-39674 Import, export, interoperability

Overlay models: The overlay model inquire dialog box has been improved. For example, the model name is now displayed.

TTSD-4446 Import, export, interoperability

Inquire reference objects: The reference object inquire dialog box has been improved: the material type now works, and the assembly description has been removed because it was not needed.

TTSD-44471 Import, export, interoperability

IFC4 export: The default bolt color is now correct when exported. Previously, the default bolt color was gray.

TTSD-44903 Import, export, interoperability

IFC2x3 export: Earlier, when you exported a bolt group with both regular and oversized holes by using the IFC2x3 surface geometry export, all holes were exported as oversized. This has now been fixed.

TTSD-50139 Import, export, interoperability

Reference models: STP files were not displayed correctly in 3D model views, there were problems with the transparency. This issue has now been fixed.

TTSD-50179 Import, export, interoperability

Export to Sketchup: You can now select the desired SketchUp version in the  export dialog box.

TTSD-50296 Import, export, interoperability

Reference models: Previously, the solids visualization was sometimes incorrect for the STEP/IGES reference model files. This issue has now been fixed.

TTSD-50408 Import, export, interoperability

Reference models: Reference object layers are now available in the inquire dialog box and change management properties.

TTSD-50848 Import, export, interoperability

IFC2x3 export: Earlier, the list of attributes in additional property sets was sometimes empty. This issue has now been fixed.

TTSD-50955 Import, export, interoperability

Import from Tekla Structural Designer: Reinforcement was not transferred from Tekla Structural Designer when the relevant beams, columns, walls, and slabs were originally created in the Tekla Structures model. This issue has now been fixed.

TTSD-51102 Import, export, interoperability

Trimble Connect: Now the upload to Trimble Connect model export also supports the PHASE.NAME attribute and other PHASE.<attribute_name> attributes for bolts.

TTSD-51245 Import, export, interoperability

Point clouds: In some cases, point clouds were rendered incorrectly with an offset. This issue has now been fixed.

TTSD-51391 Import, export, interoperability

SketchUp export: Rebar sets are now exported properly in the SketchUp export.

TTSD-51618 Import, export, interoperability

Point clouds: Handling of large (at least 60 GB), non-potree point clouds is now supported as one file.

TTSD-51686 Import, export, interoperability

IFC2x3 export: Bolts in assemblies now have correct color when exported to IFC2x3 with current view colors.

TTSD-8325 Import, export, interoperability

Reference models: Reference model report property GUID now returns the reference object GUID the same way as EXTERNAL.GUID does.

TPLED-219 Templates and reports

Template Editor: Valuefield formula functions NextValue() and PreviousValue() no longer ignore the sort order when they are used in valuefield formulas. 

TPLED-241 Templates and reports

Template Editor: When a sub-row was filtered out with a rule, the top-level row rule with a CopyField() function could give a wrong result. This issue has now been fixed.

TPLED-243 Templates and reports

Template Editor: A symbol with a rule that used the GetValue function only worked in the first row in the row hierarchy. This issue has now been fixed.

TSAC-5205 Templates and reports

The custom mesh properties CUSTOM.MESH_LENGTH_NET, CUSTOM.MESH_WIDTH_NET, and CUSTOM.MESH_SIZE_NET now follow the modeling direction.

TTSD-51813 Templates and reports

Template Editor: In a template, the summary row worked incorrectly when the parent row was hidden. This has now been fixed.

TSAC-6317 Drawings

View-level dimensioning: When skew edges dimension orientation was set to dimension along the edge, the dimensions were incorrectly created in some cases. This issue has now been fixed.

TSAC-6529 Drawings

View-level dimensioning: Drawing dimensioning method Filter performance has been improved in large models. 
NOTE: This improvement changes the guidance we gave earlier when releasing Tekla Structures version 2021 that using a selection filter (.SObjGrp) would be faster than using a view filter (.vf). Now the view filter is faster, and we recommend using only view filters and no longer selection filters.

TTSD-50381 Drawings

Layout editor: Editing sizes in the drawing layout editor works now more reliably.

TTSD-50546 Drawings

Section view labels in drawings no longer disappear when you have changed the section name. Previously, the section view labels disappeared in some rare cases.

TTSD-51381 Drawings

Earlier, when you set a negative Depth down or Depth up value for a drawing view, curved grid lines disappeared from the view. This issue has now been fixed.

TTSD-48039 Tekla Model Sharing

The Project viewer role now uses the same set of permissions as the Carbon configuration.

TTSD-51464 Tekla Model Sharing

If the on-premises server is not accessible, Tekla Structures now reports connection errors more accurately.

TTSD-49885 Reinforcement

Rebar sets: An issue was fixed where the Clear reinforcing bar numbers command, when used with rebar sets, did not flag the numbering of the parent cast unit to be out of date.

TTSD-51123 Reinforcement

Rebar sets: The Diagnose model command now reports Invalid rebar geometry warnings for rebar sets that do not have valid geometry. Previously, rebar set geometry was not checked by the command.

TTSD-51137 Reinforcement

Rebar sets: In unselected rebar sets, the leg faces that are not valid now have appropriate visibility after the Show only selected command has been used.

TTSD-51561 Reinforcement

Rebar sets: Previously, when rebar set layers were edited, Tekla Structures might close unexpectedly. This issue has now been fixed.

TTSD-40910 Modeling

Previously, clash check was not performed correctly between non-subdivided reference models with a scale and native Tekla Structures objects. This issue has now been fixed.
 

TTSD-47326 Modeling

Snapping issues with cast-in-place concrete parts that are shown as separated have now been fixed.

TTSD-47887 Modeling

Previously, the snap to nearest point and snap to any point snap switches were forced on when the Split command was used. This has now been fixed, and snapping follows the switch settings.

TTSD-48887 Modeling

Previously, very rarely, when copying similar objects which did not belong to any assembly, Tekla Structures might have stopped working. Now, this does not happen anymore.

TTSD-50763 Modeling

An issue in the creation of weld preparations that use edge chamfering could cause Tekla Structures to stop responding or close unexpectedly. This issue has now been fixed.

TTSD-51158 Modeling


Previously, simultaneous autosave for users in a multi-user model did not work correctly because of a file write conflict in the model folders. This has now been fixed.

TTSD-16209 Licensing

Previously, the Role and Configuration fields in the License section of the Settings menu did not show the values defined in the bypass.ini file. Now the fields show the correct values, but you cannot change the values.

TTSD-50598 Licensing

Previously, when you opened Tekla Structures, a new browser tab was always opened. Now, when you open Tekla Structures and log in, the default browser window does not open anymore if you have a valid session and authentication available.

TTSD-51288 Licensing

The sign-in browser is shown less frequently when users who are already signed in change from one version or product to another.

TTSD-50071 Installation

The Tekla Structures installer no longer includes the outdated Microsoft Visual C++ 2010 Redistributable Package. Instead, Tekla Structures has been updated to use the newer Visual Studio 2015 + .NET Framework 4.8.

TTSD-51433 Core

The performance of large models has been improved, and the freezing of the model should not happen anymore.

TTSD-50146 Tools and components

The TSEP installer now provides improved logging when a file cannot be installed because the target folder is not writeable or because a file with the same name exists and cannot be overwritten.

TTSD-51635 Tools and components

The handling of invalid or empty *.tsep files has been improved in the TSEP File Dispatcher. Previously, double-clicking an invalid file could cause the application to become unresponsive. Now, a message is shown to inform the user that the file is invalid.

TTSD-51411 Numbering

Previously, in some situations, parts with different contour marking were not numbered differently. This issue has now been fixed.

TTSD-49537 User interface

Previously, when selecting the Open button and then the All models tab on the start screen, texts were overlapping. Now, the popup text of the Open button on the start screen closes automatically when the mouse cursor is moved to the start screen tabs area.
 

TTSD-51056 Import, export, interoperability (steel)

NC/DSTV: Earlier, in the DSTV export of bent plates, the XS_USE_NEW_PLATE_DESIGNATION advanced option affected the AK block and header, but not the KA block. This issue has now been fixed.

TTSd-51310 Import, export, interoperability (steel)

NC/DSTV export: Earlier, when a part was presented twice in the bolt connection, bolt holes were missing from the export to DSTV. This issue has now been fixed.

TSAC-6541 Import, export, interoperability (concrete)

Export ELiPLAN file (68): Previously, incorrect values L1, L2, and DL were exported for elements that had been cut. This issue has now been fixed.

TSAC-6610 Import, export, interoperability (concrete)

Export ELiPLAN file (68): Previously, weep holes could be exported inside recesses and other elements inside cast unit. This issue has now been fixed, and the export of such weep holes is now prevented.

TSAC-6615 Import, export, interoperability (concrete)

Export Unitechnik (79): Rebar report field properties, such as DIM_R, can now be written into rebar and mesh info fields with Template.

È stato utile?
Precedente
Successivo