Column stiffeners (1030)
Column stiffeners (1030) creates stiffeners to a point you pick on a beam.
Objects created
-
Stiffeners
-
Welds
Use for
Situation | Description |
---|---|
Upper and lower stiffeners are created on a beam. |
Selection order
-
Select the beam.
-
Pick a point on the beam to indicate the stiffener position.
The stiffeners are created automatically when you pick the point.
Part identification key
Description | |
---|---|
1 |
Upper stiffener |
2 |
Lower stiffener |
Picture tab
Use the Picture tab to define the stiffener chamfer dimensions.
Dimensions
Description | |
---|---|
1 |
Horizontal chamfer dimension |
2 |
Vertical chamfer dimension |
3 |
Horizontal chamfer dimension |
4 |
Vertical position of the stiffener Stiffeners are by default created in the vertical direction in the middle of the beam. |
Parts tab
Use the Parts tab to define the part properties.
Parts
Option | Description | Default |
---|---|---|
Upper stiffener |
Thickness, width, and height of the stiffener |
Thickness = 10 mm Width = 100 mm Height = 200 mm |
Lower stiffener |
Thickness, width, and height of the stiffener |
Equal to the dimensions of the upper stiffener |
Option |
Description |
Default |
---|---|---|
Pos_No |
Prefix and start number for the part position number. Some components have a second row of fields where you can enter the assembly position number. |
The default part start number is defined in the Components settings in . |
Material |
Material grade. |
The default material is defined in the Part material box in the Components settings in . |
Name |
Name that is shown in drawings and reports. |
Parameters tab
Use the Parameters tab to define the stiffener position and beam fitting.
Stiffener position
Description | |
---|---|
1 |
Stiffener offset from the beam center line |
Beam fitting
Option | Description |
---|---|
Default Beam is not cut. AutoDefaults can change this option. |
|
Beam is not cut. |
|
Beam is cut at the point where the stiffeners are created. |
General tab
Click the link below to find out more:
Analysis tab
Click the link below to find out more:
Welds
Click the link below to find out more: