XS_BOLT_MARK_STRING_FOR_SIZE
Category in Advanced options dialog box
Marking: bolts
Use to define the contents of the
Size element in bolt marks. For example, to have the bolt number and the hole diameter in the mark, enter
%BOLT_NUMBER%*D%HOLE.DIAMETER%.
This advanced option is only used when there is a bolt and the hole is a normal one.
The advanced options
XS_SHOP_BOLT_MARK_STRING_FOR_SIZE
and
XS_SITE_BOLT_MARK_STRING_FOR_SIZE override this setting.
You can use any combination of text and the following options as the value for this advanced option. Enclose each option in % characters.
Note that if you are defining this advanced in an .ini file, use double percent signs
around the switches %%BOLT_NUMBER%%*D%%HOLE.DIAMETER%%.
To use special characters enter a backslash (\) followed by an ASCII number. You can use the options in any order, and make calculations.
-
BOLT_NUMBER
-
DIAMETER
-
LENGTH
-
HOLE.DIAMETER
-
LONG_HOLE_X
-
LONG_HOLE_Y
-
LONGHOLE_MIN (the shorter of the slotted hole dimensions)
-
LONGHOLE_MAX (the longer of the slotted hole dimensions)
-
BOLT_STANDARD
-
BOLT_MATERIAL
-
BOLT_ASSEMBLY_TYPE
-
BOLT_COUNTERSUNK
-
BOLT_SHORT_NAME
-
BOLT_FULL_NAME
This advanced option is model specific and the setting is saved in the options database.
See also
XS_SITE_BOLT_MARK_STRING_FOR_SIZE