Define or modify the current analysis properties of a part type independently from analysis models
|
-
On the
Analysis & design tab, click
Part analysis properties, and then click a relevant part type.
-
In the analysis properties dialog box:
-
Modify the properties.
-
Click
Apply or
OK to save the changes as the current analysis properties of the part type.
Tekla Structures will use these current analysis properties for new parts of this type that you create in the model.
|
Define or modify the default analysis properties of a part independently from analysis models
|
-
Ensure that you do not have an analysis model selected in the
Analysis & Design Models dialog box.
-
In the physical model, select a part.
-
Right-click and select
Analysis Properties.
-
In the part’s analysis properties dialog box:
-
Modify the properties.
-
Click
Modify to save the changes as the default analysis properties of the part in the
AnalysisPartDefaults.db6 file.
Tekla Structures will use these default analysis properties instead of current analysis properties for this part when you add it to an analysis model.
|
View the analysis properties of a part independently from analysis models
|
-
Ensure that you do not have an analysis model selected in the
Analysis & Design Models dialog box.
-
In the physical model, select a part.
-
Right-click and select
Analysis Properties.
If you have already previously modified the analysis properties of this part,
Tekla Structures displays these default analysis properties in the part’s analysis properties dialog box (for example,
Beam Analysis Properties).
If you have not modified the analysis properties of this part,
Tekla Structures displays the current analysis properties in the part’s analysis properties dialog box (for example,
Beam Analysis Properties - Current properties).
-
In the part’s analysis properties dialog box:
-
View the properties.
-
Click
Cancel to close the dialog box.
|
View or modify the properties of an analysis part in an analysis model
|
- On the
Analysis & design tab, click A&D
models.
-
In the
Analysis & Design Models dialog box, select an analysis model (for example, AnalysisModel3).
-
In the physical model, select a part.
-
Right-click and select
Analysis Properties.
-
In the part’s analysis properties dialog box (for example,
Beam Analysis Properties - AnalysisModel3), do one of the following:
-
View the properties, and then click
Cancel to close the dialog box.
-
Modify the properties, and then click
Modify to save the changes.
|