Create a reinforcing bar group using Rebar shape catalog

Tekla Structures
2022
Tekla Structures

Create a reinforcing bar group using Rebar shape catalog

A reinforcing bar group includes several identical, or very similar, reinforcing bars. You can create a reinforcing bar group by selecting a predefined reinforcement shape from Rebar shape catalog. The predefined shapes in Rebar shape catalog are based on the shapes that have been defined in Rebar shape manager and saved in the RebarShapeRules.xml file.

Rebar shape catalog does not work with tapered reinforcing bar groups or with 3D bar shapes.

Note:

If you do not want to use the predefined shapes but want to manually define the bar shape, use the Bar group command instead.

  1. On the Rebar tab, click Bar group > Rebar shape catalog.

    The Rebar Shape Catalog dialog box opens.

  2. Select one of the predefined shapes from the tree view on the left.

    You can add frequently used shapes to the tree view, or delete the shapes that you do not need.

    If you select an existing reinforcement in the model and click the Get button, the properties of that reinforcement are displayed in the Rebar Shape Catalog dialog box.

  3. If needed, modify the bar properties.
    • To set a Length of leg value, click a leg in the preview of the shape.

      If you do not enter a Length of leg value, the leg length is calculated automatically according to the dimensions of the concrete part.

    • To set a Bending angle value for a bend that is not 90 degrees, click one of the legs next to the bend.
    • For circular, polygonal and spiral reinforcement, you can enter Circle diameter and Overlap distance values.

    The hook properties are visible only if you have set the advanced option XS_​REBAR_​RECOGNITION_​HOOKS_​CONSIDERATION to FALSE in File menu > Settings > Advanced Options > Concrete Detailing.

  4. If needed, set the reference point of the reinforcement to start, middle, or end by double-clicking the different legs or hooks in the preview of the shape.
  5. Click OK.
  6. In the model, place the mouse pointer over a part face or edge.

    A preview showing the placing and dimensions of the reinforcement is displayed.

  7. Based on the preview, select a placing for the reinforcing bar group and click the left mouse button.

    Tekla Structures creates the reinforcement.

  8. If you want to modify the reinforcement, do one of the following:
    • Use direct modification. Ensure that the Direct modification switch is active.

    • Double-click the reinforcement to open the reinforcing bar group properties, and modify the properties.

Was this helpful?
Previous
Next