Modify cast units

Tekla Structures
2022
Tekla Structures

Modify cast units

Change the cast unit main part

The main part in a concrete cast unit is the one with the largest volume of concrete. You can change the main part in a cast unit.

  1. If needed, check what is currently the main part of the cast unit.

    Use the Inquire tool to check which objects belong to a particular cast unit.

  2. Ensure that the Select objects in assemblies selection switch is active.
  3. Select the new main part.
  4. Right-click and select Set as new main part of assembly.

Remove objects from a cast unit

  1. On the Concrete tab, click Cast unit > Remove from cast unit.
  2. Select the object you want to remove from the cast unit.

    You need to restart the command to remove another object.

Check and highlight objects in a cast unit

Use the Inquire tool to check which objects belong to a particular cast unit or assembly.

  1. On the ribbon, click the down arrow next to , and then select Assembly objects.
  2. Select a part that belongs to a cast unit or an assembly.

    Tekla Structures highlights the other parts that belong to the same cast unit or assembly. The following colors are used:

    Object type

    Highlight color

    Concrete - main part

    magenta

    Concrete - secondary part

    cyan

    Reinforcement

    blue

    Steel part - main part

    orange

    Steel part - secondary part

    yellow

Explode a cast unit

You can ungroup the objects belonging to a cast unit.

  1. On the Concrete tab, click Cast unit > Explode.
  2. Select an object in the cast unit you want to explode.
Was this helpful?
Previous
Next