You can modify the user-defined attributes before you create a drawing.

1. On the Drawings & reports tab, click Drawing properties and select the drawing type.
2. Load drawing properties that are as close to the ones you need as possible.
3. Click User-defined attributes.
4. On the Workflow tab, enter project-specific information to be displayed in drawings and in the Document manager.
5. On the Parameters tab, enter a user-defined Comment for drawings, projects, assemblies, parts, and so on.
6. Use the User field 1 to User field 8 on the Parameters tab to enter drawing-specific information.
7. On the Title tab, select if you want to use project-specific or drawing-specific information in the title block of the drawing.

   When you click Use project settings, you cannot enter any information in the title block fields.

8. If you selected Use drawing settings, the title block fields become available, and you can enter the necessary data in the fields.
9. General arrangement drawings: Click OK.
10. Click Save to save the drawing properties, then click OK and create the drawing.