Tube-SlottedHole
Tube-SlottedHole connects a plate to a round tube. This connection creates a slotted hole to the main part.
Objects created
-
Cuts
-
Welds
Use for
Situation |
Description |
---|---|
|
Slotted hole with a plate. |
Limitations
-
No support for polybeams or contour plates.
-
The hole is created only to one side of the main part. Tube-SlottedHole cannot be used for creating penetrating slots.
-
Connections are not created for plates which are not parallel to the main axis of the tube.
Selection order
-
Select the main part (round tube).
-
Select the secondary part (plate).
The connection is created automatically when the secondary part is selected.
Parameters tab
Use the Parameters tab to control the slotted holes.
Connection options
Option |
Description |
---|---|
|
Slotted Hole Creates a slotted hole to the main part. |
Tube NC Parameters
Option |
Description |
---|---|
Bevel angle |
The weld preparation angle created during NC processing of the tube. The bevel is created to the slotted hole. |
Root opening above |
The gap between the plate and the tube. The gap is created in the model. |
Maximum torch angle |
Maximum torch angle. The default is 70.0. |
Minimum torch angle |
Minimum torch angle. The default is -70.0. |
Bevel angle information is used only in NC data, and no actual weld preparations are created in the model.
Weldings tab
Click the link below to find out more:
General tab
Click the link below to find out more:
Analysis tab
Click the link below to find out more: