Beam to beam framing connections
Shear tabs
Example | Description |
---|---|
Full depth shear tab - secondary beam cut short of main part. Use Beam with stiffener (129). |
|
Full depth shear tab - secondary part sloped and/or skewed. Use Beam with stiffener (129). |
|
Simple shear tab to beam. Use Shear plate simple (146). |
|
Simple shear tab to beam - bolt elimination option. Use Shear plate simple (146). |
|
Simple shear tab to beam - skewed secondary part. Use Shear plate simple (146). |
|
Simple shear tab to beam - sloped (and skewed) secondary part. Bolts and plate oriented with secondary part. Use Shear plate simple (146). |
|
Simple shear tab to beam - sloped and skewed secondary part. Valley condition. Use Shear plate simple (146). |
|
Simple shear tab to beam - sloped and skewed secondary part. Valley condition. Use Shear plate simple (146). |
|
Partial depth shear tab to top flange of beam - square or skewed, stiffener option. Use Welded to top flange (147). |
|
Partial depth shear tab to top flange of beam. Sloped/ square or skewed. Use Welded to top flange (147). |
|
Partial depth shear tab to top flange of beam, secondary beam cut short of main part. Square, sloped, skewed. Use Welded to top flange S (149). |
|
Full depth shear tab. Square, sloped, skewed. Use Full depth (184). |
|
Full depth shear tab. Secondary beam cut short of main part. Use Full depth S (185). |
|
Full depth shear tab. Secondary beam cut short of main part. Sloped secondary. Use Full depth S (185). |
|
Full depth shear tab. Secondary beam cut short of main part. Sloped and skewed secondary (hip & valley). Use Full depth S (185). |
|
Full depth shear tab. Secondary beam cut short of main part. Secondary offset. Bolt elimination option. Use Full depth S (185). |
Clip angles
Example | Description |
---|---|
Clip angle connection – single-sided clip/double-sided clip. Use Clip angle (141). |
|
Clip angle connection – single-sided clip/double-sided clip. Sloped secondary part. Various notching options. Use Clip angle (141). |
|
Clip angle connection – single-sided clip/double-sided clip. Weld preparation option. Use Clip angle (141). |
|
Clip angle connection – single-sided clip/double-sided clip. Sloped secondary part. Use Clip angle (141). |
|
Clip angle connection – single-sided clip/double-sided clip. Two secondary parts. Bolted/bolted, welded/bolted, welded/welded options. Use Two sided clip angle (143). |
|
Clip angle connection – single-sided clip/double-sided clip. Two secondary parts at differing heights. Use Two sided clip angle (143). |
|
Clip angle connection – single-sided clip/double-sided clip. Two secondary parts. Safety connection. Use Two sided clip angle (143). |
|
Clip angle connection – single-sided clip/double-sided clip. Two secondary parts. One sloped. Use Two sided clip angle (143). |
End plates
Example | Description |
---|---|
End plate connection - level or sloped, square or skewed secondary part. Various notching options. Use End plate (144). |
|
End plate connection – extended plate with or without haunches. Use End plate (144). |
|
End plate connection – two secondary parts. Automatic notch for bolt clearance. Use Two sided end plate (142). |
|
End plate connection – two secondary parts at differing heights. Use Two sided end plate (142). |
|
End plate connection – two secondary parts. Square and /or skewed. Use Two sided end plate (142). |
|
End plate connection – two secondary parts. Safety connection. Use Two sided end plate (142). |
|
End plate connection – two secondary parts. Level and/or sloped. Use Two sided end plate (142). |
Bent plate
Example | Description |
---|---|
Bent plate connection – skewed or square secondary part, plate near side and far side. Use Bent plate (190). |
|
Bent plate connection – skewed or square secondary part, plate one side. Use Bent plate (190). |
|
Bent plate connection – skewed or square secondary part, plate one side. Various plate placing options. Use Bent plate (190). |
|
Bent plate connection – skewed and sloped (hip & valley). Use Bent plate (190). |
Bearing type
Example | Description |
---|---|
Beam to beam bearing connection. Options for 1,2,3, or 4 bolts. Use Seating (30). |
|
Beam to beam bearing connection. Spacer option. Use Seating (30). |
|
Beam to beam bearing connection. Brace support. Use Seating (30). |
|
Beam to beam bearing connection with stub column. Square, sloped and skewed conditions. Use Cross (4). |
|
Beam to beam bearing clamp type connection. Use Seating with nail (36). |
|
Beam to beam bearing purlin connection to single purlin. Use Purlin connections (93). |
|
Beam to beam bearing purlin connection to two purlins. Use Purlin connections (93). |
|
Beam to beam bearing notched seating connection. Square and skewed conditions. Use Notched seating (9). |
|
Beam to beam bearing tube steel rails to main part. Cope or hole bolt access options. Use Tube rail (113). |
|
Beam to beam bearing notched seat with angle. Use Rail joint (70). |
|
Beam to beam bearing rafter connection to two secondary parts. Notching required. Use Rail joint (70). |
|
Beam to beam bearing rafter connection to two secondary parts. Plate. Notching required. Use Rail joint (70). |
|
Beam to beam bearing rafter connection to two secondary parts. Sloped/level notching required. Use Rail joint (70). |
|
Beam to beam full bearing rafter connection to two secondary parts. Plate. Use Cold rolled overlap (1). |
|
Beam to beam full bearing rafter connection to two secondary parts. Angle. Use Cold rolled overlap (1). |
|
Beam to beam full bearing rafter connection to two secondary parts. Knee brace option. Use Cold rolled overlap (1). |