Stiffened base plate (1014)

Tekla Structures
2021
Tekla Structures

Stiffened base plate (1014)

Stiffened base plate (1014) creates a base plate that is connected to a column end.

Objects created

  • Base plate

  • Stiffeners

  • Shim plates (optional)

  • Leveling plate (optional)

  • Shear key (optional)

  • Extra plates connecting the anchor rods

  • Anchor rods

  • Bolts

  • Welds

  • Additional component (optional)

Use for

Situation

Description

Base plate with stiffeners

Base plate with stiffeners on the flange

Base plate with stiffeners on the flange

Base plate with stiffeners on the flange

Base plate with stiffeners on the flange

Base plate with stiffeners on the web

Before you start

Create a column.

Selection order

  1. Select the main part (column).

  2. Pick a position.

    The detail is created automatically.

Part identification key

Part

1

Base plate

2

Shim plate

3

Leveling plate

4

Shear key

5

Stiffener

Picture tab

Use the Picture tab to control the position of the base plate and the length and position of the shear key.

Dimensions

Description

Default

1

Distance from the flange to the edge of the base plate.

Enter a negative value to make the base plate larger.

2

Weld gap.

3

Height of the shear key.

Equal to the column width

Shear key offset

Description

1

Distance of the stiffener from the edge of the column flange.

2

Shear key vertical offset from the column center.

3

Shear key horizontal offset from the column center.

Parts tab

Use the Parts tab to control the dimensions of the base plate, web plates, flange plates, shear key, leveling plate, and shim plate(s).

Plate

Option

Description

Default

Plate

Base plate thickness.

BASEPLATE

Web plates

Web plate thickness.

10 mm

Flange plate 4

Flange plate thickness.

10 mm

Leveling plate

Leveling plate thickness, width and height.

Leveling plate hole diameter

Leveling plate hole diameter.

Fitting plate

Shim plate thickness, width and height.

Define up to three different shim plates.

Number of fitting pl.

Number of shim plates for each thickness.

1

Additional beam

Shear key profile by selecting it from the profile catalog.

HEA 300 (in Default environment)

Additional beam rotation

Select the shear key rotation type and define the rotation angle.

Horizontal plates

Horizontal plate thickness.

L profile, flange

Profile for L profile, flange by selecting it from the profile catalog.

L profile, web

Profile for L profile, web by selecting it from the profile catalog.

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

Class

Part class number.

Finish

Describes how the part surface has been treated.

Bolt edge distances in shim plate

Define the bolt edge distances for shim plates. When these fields are empty, shim plates are of the same size as the base plate.

Description

Default

1

Horizontal bolt edge distance in the shim plate.

30 mm

2

Vertical bolt edge distance in the shim plate.

30 mm

Shim plate shape

Option Description

Default

Holes are based on the bolt group of the connection.

AutoDefaults can change this option.

Holes are based on the bolt group of the connection.

Finger shim plate with horizontal slots.

The plate can be installed from the right or the left side of the connection.

Finger shim plate with vertical slots.

The plate can be installed from the top of the connection.

Two separate finger shim plates with horizontal slots.

Two separate finger shim plates with vertical slots.

Tolerance for slots

Define the tolerance for the slots in finger shim plates. The width of the slot is the bolt diameter + the tolerance.

Base plate mounting grooves

Option Description

Default

Mounting grooves are not created.

AutoDefaults can change this option.

Mounting grooves are not created.

Mounting grooves are created horizontally.

Mounting grooves are created vertically for the first and last row of the bolts. For other rows of bolts, the mounting grooves are created horizontally.

Tolerance for mounting grooves

Define the tolerance for the mounting grooves in the base plates. The width of the groove is the bolt diameter + the tolerance. If you do not enter a value, the bolt tolerance value is used.

Parameters tab

Use the Parameters tab to control the component and the grout hole.

Grout hole

Define whether a grout hole is created in the base plate. The hole is also created in the leveling plate and shim plates, if they exist in the detail.

Option

Description

Default

Grout hole is not created.

AutoDefaults can change this option.

Grout hole is not created.

Grout hole is created.

Two grout holes are created.

Grout hole dimensions

Description

1

Location of the grout hole from the center of the column in the direction of the web.

2

Grout hole diameter.

3

Location of the grout hole from the center of the column in the direction of the flange.

Using additional components

You can use additional system or custom components to modify the column end or the base plate. For example, you can create special backing plates, weld preparations, and weld access holes for the column end.

If you use additional system or custom components, you need to manage the column end or the base plate properties in the additional component in question. When using several components, there may be multiple welds and cuts.

Optioon

Description

Component

Define a system or a custom component by selecting it from the Applications & components catalog.

Attributes

Enter the name of the attribute file for the selected component.

Input

Define to which parts the selected component is applied.

  • Default is same as Base + Column.

  • Column sets the column as the main part. Use this option for details.

  • Column + Base sets the column as the main part and the base plate as the secondary part.

  • Base + Column sets the base plate as the main part and the column as the secondary part.

  • Base sets the base plate as the main part.

Bolts

Use the Bolts tab to control the bolt properties.

Bolt group dimensions

Description

1

Select how to measure the dimensions for horizontal bolt group position.

  • Left: From the left edge of the secondary part to the leftmost bolt.

  • Middle: From the center line of the secondary part to the center line of the bolts.

  • Right: From the right edge of the secondary part to the rightmost bolt.

2

Dimension for horizontal bolt group position.

3

Bolt edge distance.

Edge distance is the distance from the center of a bolt to the edge of the part.

4

Number of bolts.

5

Bolt spacing.

Use a space to separate bolt spacing values. Enter a value for each space between bolts. For example, if there are 3 bolts, enter 2 values.

6

Dimension for vertical bolt group position.

7

Select how to measure the dimensions for vertical bolt group position.

  • Top: From the upper edge of the secondary part to the uppermost bolt.

  • Middle: From the center line of the bolts to the center line of the secondary part.

  • Below: From the lower edge of the secondary part to the lowest bolt.

8

Define which bolts are deleted from the bolt group.

Enter the bolt numbers of the bolts to be deleted and separate the numbers with a space. Bolt numbers run from left to right and from top to bottom.

Bolt basic properties

Option

Description

Default

Bolt size

Bolt diameter.

Available sizes are defined in the bolt assembly catalog.

Bolt standard

Bolt standard to be used inside the component.

Available standards are defined in the bolt assembly catalog.

Tolerance

Gap between the bolt and the hole.

Thread in mat

Defines whether the thread may be within the bolted parts when bolts are used with a shaft.

This has no effect when full-threaded bolts are used.

Yes

Site/Workshop

Location where the bolts should be attached.

Site

Cut length

Defines the depth at which Tekla Structures searches for the sections of the bolted parts. You can determine whether the bolt will go through one flange or two.

Slotted holes

You can define slotted, oversized, or tapped holes.

Option

Description

Default

1

Vertical dimension of slotted hole.

0, which results in a round hole.

2

Horizontal dimension of slotted hole, or allowance for oversized holes.

0, which results in a round hole.

Hole type

Slotted creates slotted holes.

Oversized creates oversized or tapped holes.

No hole does not create holes.

Rotate Slots

When the hole type is Slotted, this option rotates the slotted holes.

Slots in

Part(s) in which slotted holes are created. The options depend on the component in question.

Bolt assembly

The selected check boxes define which component objects (bolt, washers, and nuts) are used in the bolt assembly.

If you want to create a hole only, clear all the check boxes.

To modify the bolt assembly in an existing component, select the Effect in modify check box and click Modify.

Bolt length increase

Define how much the bolt length is increased. Use this option when, for example, painting requires the bolt length to be increased.

Stiffeners

Use the Stiffeners tab to control the web plate stiffeners and the flange plate stiffeners.

Web plate stiffener dimensions

Description

Default

1

Height of the web plate stiffener.

200 mm

2

Bottom width of the web plate stiffener.

100 mm

Web plate stiffener chamfer dimensions

Description

1

Top horizontal chamfer dimension.

2

Top vertical chamfer dimension.

3

Bottom horizontal chamfer dimension.

4

Bottom vertical chamfer dimension.

Web plate stiffener position

You can create stiffeners to different positions using the web plate stiffener position options.

Option

Description

Default

Type 2

AutoDefaults can change this option.

Type 1

Type 2

Type 3

Type 4

Type 5

Type 6

Type 7

Flange plate stiffener dimensions

Description

Default

1

Height of the flange plate stiffener.

200 mm

2

Bottom width of the flange plate stiffener.

100 mm

Flange plate stiffener chamfer dimensions

Description

1

Top horizontal chamfer dimension.

2

The top vertical chamfer dimension.

3

Bottom horizontal chamfer dimension.

4

Bottom vertical chamfer dimension.

Flange plate stiffener position

You can create stiffeners to different positions using the flange plate stiffener position options.

Option

Description

Default

Type 2

AutoDefaults can change this option.

Type 1

Type 2

Type 3

Type 4

Stiffener dimensions

If you have created the stiffeners using other than the default stiffener position options, you can separately define the plate dimensions for different positions.

Description

1

Width of the stiffener.

2

Height of the stiffener.

3

Width of the stiffener.

Stiffener plate width

If you have selected type 5 as the web plate stiffener position or type 4 as the flange plate stiffener position, you can define the stiffener width.

Description

Default

1

Width of the stiffener.

200 mm

Stiffener chamfer dimensions

Description

1

Horizontal chamfer dimension.

2

Vertical chamfer dimension.

Anchor rods tab

Use the Anchor rods tab to control the creation of different types of anchor rods.

Anchor rod dimensions

Option

Description

Rod profile

Anchor rod profile.

You can add a comment about the part.

Nut profile

Nut profile.

Washer profile

Washer profile.

Plate washer

Plate washer thickness, width and height.

Cast plate

Cast plate thickness, width and height.

Grout

Grout thickness.

Grouting helps you to model columns to the top of concrete parts and place the base plate correctly. It also makes it easier to dimension the detail in GA drawings.

By default, no grouting is created.

Select whether the grouting is created above or below the detail creation point. This also affects the shim plates.

Anchor rod part properties

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

Class

Part class number.

Base plate with

Select whether to create the base plate with bolts, anchor rods, or a custom component.

By default, the base plate is created with Bolts.

Anchor rod dimensions

Description

Default

1

Size or the length of the nut.

anchor rod diameter

2

Size or the thickness of the washer.

half of nut size

3

Length of the anchor rod.

500 mm

4

Length of the anchor rod above the base plate.

50 mm

5

Distance between the cast plate and the base plate.

60 mm

6

Length of the upper thread.

0 mm

Anchor rods types

Option

Description

Default

Type 1

AutoDefaults can change this option.

Type 1

a

Radius of the hook

b

Width of the hook

a = 2*anchor bar diameter

b = 1/5 of anchor bar length

a

Radius of the hook

b

Width of the hook

c

Height of the hook

c = same as width of the hook

d

Length of the anchor rod below the extra plate

e

Length of the lower thread

d = 2*nut size

e = 4*nut size plus thickness of extra plate

Hook direction

Option

Description

Default

Type 1

AutoDefaults can change this option.

Type 1

Type 2

Type 3

Type 4

Bolting direction

Note:

You can define the bolting direction if you have created the base plate with bolts.

Option

Description

Default

Bolting direction 1

AutoDefaults can change this option.

Bolting direction 1

Bolting direction 2

Cast plate holes tolerance

Option

Description

Default

Cast plate holes tolerance

Tolerance of the cast plate holes.

same as bolt tolerance

Washer hole tolerance

Option

Description

Create hole in washer

By default, a hole is not created in the washer.

Tolerance of the washer hole.

Create assembly from all anchors

Define whether anchors are included in an anchor rod assembly. You can also include leveling plates into the assembly.

Create

Description

1

Create the nut profile.

You can select to create two nuts at the top of the anchor rods.

2

Create the washer profile.

3

Create the washer plate.

Anchor rod assembly

Define which parts of the anchor rod are included in the anchor rod assembly.

You can weld the washer plates above and below the base plate.

Extra plates tab

Use the Extra plates tab to control the placement, rotation, and type of the profiles (extra profile 1) created at the bottom of each anchor bar and the profiles (extra profile 2) that connect rows of anchor bars.

Part dimensions

Option

Description

Default

Extra profile 1

First extra profile by selecting it from the profile catalog.

PL10*100

Extra profile 2

Second extra profile by selecting it from the profile catalog.

Part properties

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

Class

Part class number.

Edge distance of extra profile 1

Description

Default

1

Edge distance of extra profile 1.

50 mm

Type and direction of extra profile 1

Option

Description

Default

Type 1

AutoDefaults can change this option.

Type 1

Type 2

Type 3

Edge distance of extra profile 2

Description

Default

1

Distance of extra profile 2 from the axis of the anchor bar.

Half of the nut size or anchor bar diameter

Extra profile 2 type

Option

Description

Default

Type 1

AutoDefaults can change this option.

Type 1

Type 2

Type 3

Type 4

Type 5

Type 6

Length of extra profile 2

Description

Default

1

Length of extra profile 2 from the axis of the anchor bar.

50 mm

Direction of extra profile 2

Option

Description

Default

Type 1

AutoDefaults can change this option.

Type 1

Type 2

Extra profile 1 properties

Option

Description

Default

Hole tolerance

Hole tolerance of extra profile 1.

Same as bolt tolerance

Circular profile height

Height of circular extra profile 1.

Profile rotation

Profile rotation of extra profile 1.

Front

Extra profile 2 rotation

Option

Description

Default

Extra profile 2 rotation

Profile rotation of extra profile 2.

Front

General tab

Click the link below to find out more:

General tab

Analysis tab

Click the link below to find out more:

Analysis tab

Was this helpful?
Previous
Next