Modify slenderness settings

Tekla Structural Designer
2021
Tekla Structural Designer

Modify slenderness settings

The Braced/Bracing command provides a means to graphically review and modify the slenderness settings in each direction for concrete columns and walls.

To modify slenderness settings, do the following:

  1. Open a view and change the view regime to Review View.
  2. On the Review tab, click Show/Alter State.
  3. Go to the Properties window.
  4. In the Attribute list, select Braced/Bracing.
  5. Select the direction under consideration.

    Members are color coded according to their slenderness setting in the selected direction.

  6. Do one of the following:
    • Click an individual column or wall to modify its slenderness setting between braced and bracing.
    • Hold down the left mouse button and drag a box from left to right to modify the slenderness setting of all concrete columns and walls within the box.
    • Hold down the left mouse button and drag a box from right to left to modify the slenderness setting of all concrete columns and walls within the box or cut by the box.
Was this helpful?
Previous
Next