Review and modify sway checks

Tekla Structural Designer
2021
Tekla Structural Designer

Review and modify sway checks

You can graphically review sway check results and set the members to be checked for columns and walls.

Review sway checks

  1. Open a view and change the view regime to Review View.
  2. On the Review tab, click Show/Alter State.
  3. Go to the Properties window.
  4. In the Attribute list, select Sway check.
  5. Set Mode to Review.

Set sway checks on or off

  1. Open a view and change the view regime to Review View.
  2. On the Review tab, click Show/Alter State.
  3. Go to the Properties window.
  4. In the Attribute list, select Sway check.
  5. Set Mode to Set On , or Set Off or Toggle.
  6. In the model, click the column or wall for which you want to set the check.
    1. If Mode is Set On - the check is switched on
    2. If Mode is Set Off - the check is switched off
    3. If Mode is Toggle - the check toggles between on and off
  7. Continue setting the checks by clicking the desired columns and walls or press Esc to finish.
Was this helpful?
Previous
Next