Review and modify seismic drift

Tekla Structural Designer
2021
Tekla Structural Designer

Review and modify seismic drift

You can graphically review seismic drift check results and set the members to be checked for columns and walls.

Review seismic drift

  1. Open a view and change the view regime to Review View.
  2. On the Review tab, click Show/Alter State.
  3. Go to the Properties window.
  4. In the Attribute list, select Seismic drift.
  5. Set Mode to Review.

Set seismic drift checks on or off

  1. Open a view and change the view regime to Review View.
  2. On the Review tab, click Show/Alter State.
  3. Go to the Properties window.
  4. In the Attribute list, select Seismic drift.
  5. Set Mode to Set On , or Set Off or Toggle.
  6. In the model, click the column or wall for which you want to set the check.
    1. If Mode is Set On - the check is switched on
    2. If Mode is Set Off - the check is switched off
    3. If Mode is Toggle - the check toggles between on and off
  7. Continue setting the checks by clicking the desired columns and walls or press Esc to finish.
Was this helpful?
Previous
Next