TSAC-3912 |
Concrete components |
Wall layout: Modifying wall boundary offsets by using direct modification has been improved. Previously, the boundary offsets of a layer could stop working for some layers inside the wall. The issue that caused this has now been fixed.
|
TSAC-4093 |
Concrete components |
Floor layout: Applying break lines now works correctly. You can add multiple break lines without having to re-click the break line button in the contextual toolbar. |
TSAC-4151 |
Concrete components |
Floor layout: On the Layer tab, you can now use the leftmost check box to control if the number of the layers and the order of the layers are modified when you modify the Floor layout component.
|
TSAC-4271 |
Concrete components |
Floor layout: When picking points to create the floor layout, Floor layout now uses the work plane instead of the view plane, when the work plane is set. |
TSAC-4449 |
Concrete components |
Geometry detailing strip: The plane position and offset are now properly handled in Geometry detailing strip when the strip is applied on the face of a single part. Previously, the plane position and offset were handled properly only when applied on a wall layout or some other component. |
TSAC-4498, TSAC-3588 |
Concrete components |
Wall layout: Opening offsets are now used when the opening is part of the element outline. Note that if you want to have the door step in only one layer and not in all layers, you need to add the door opening with the door step, remove the door step from the other layers by offsetting, and make the opening large enough to cut the door step off. |
TSAC-4651 |
Concrete components |
Geometry detailing strip: Previously, Geometry detailing strip detected faces without taking the cut part into consideration. As a result, when a cut part of the geometry detailing strip clashed with another cut part of a geometry detailing strip, the instance created last was not fully created. This issue has now been fixed. |
TSAC-5029 |
Concrete components |
Automatic splicing tool now supports hooks on reinforcing bars and bar groups. The hook length is now correctly taken into account when splicing is applied. |
TSAC-5483 |
Concrete components |
Braced girder (88): Previously, hook length was not read properly from the rebar database for rebar sets that have a non-number size code in the database. This issue has now been fixed. |
TSAC-5945 |
Concrete components |
Geometry detailing strip: The cast unit type and the pour phase of an added part now match those of the main part. |
TSAC-5952 |
Concrete components |
Wall layout: Openings are now created in the extended wall area that was created by defining an offset. |
TSAC-6000 |
Concrete components |
Reinforced concrete stair (95): The Name attribute for middle meshes is now applied properly. Also, the numbering and bending radius for additional bars on the Bar C, D, E, G, and K tabs are now applied properly. |
TSAC-6025 |
Concrete components |
Embedded anchors (8): Sometimes, cutting a part where anchors were already created moved the anchors to the wrong position until you manually modified the component. This has now been fixed. |
TSAC-6174 |
Concrete components |
Wall layout T connector: Previously, the settings from the Wall layout T connector were not applied to the correct layers of the primary wall when the primary wall had the surface as the first layer closest to the secondary wall. This issue has now been fixed. |
TSAC-6203 |
Concrete components |
Wall panel reinforcement, Double wall edge and opening reinforcement: Previously, creating and resizing polygons could cause Tekla Structures to not respond. Now polygon creation and resizing have been improved to prevent this. |
TSAC-6207 |
Concrete components |
Hollowcore opening tool: Previously, openings were not created in certain situations. This issue has now been fixed. |
TSAC-6247 |
Concrete components |
Floor layout: The automatic cut-out geometry is now correct when the non-primary layer is larger than the primary layer. Previously, the geometry was not correct or it was too small in this situation. |
TSAC-6287 |
Concrete components |
Rebar shape placing tool: Previously, if placing data in the Rebar shape placing tool dialog box was changed while bar placing was active, Tekla Structures closed suddenly. This issue has now been fixed. |
TSAC-6330 |
Concrete components |
Sloping slab drainage: You can now define the slab class. |
TSAC-6357 |
Concrete components |
Floor layout: The CIP filler parts at the seams are now created correctly. Previously, slabs with cross sections that were only touching at one point in the seam were not recognized for CIP filler creation.
|
TSAC-6374 |
Concrete components |
Embed (1008): Previously, component rebars were not always created properly in environments where the rebar size code is not an integer. This issue has now been fixed. |
TSAC-6375 |
Concrete components |
Embedded anchors (8): Previously, component rebars were not always created properly in environments where the rebar size code is not an integer. This issue has now been fixed. |
TSAC-6376 |
Concrete components |
Concrete foundation (1030): Previously, component rebars were not always created properly in environments where the rebar size code is not an integer. This issue has now been fixed. |
TSAC-6377 |
Concrete components |
Reinforced concrete stair (95): Previously, component rebars were not always created properly in environments where the rebar size code is not an integer. This issue has now been fixed. |
TSAC-6379 |
Concrete components |
Corbel connection (14): Previously, component rebars were not always created properly in environments where the rebar size code is not an integer. This issue has now been fixed. |
TSAC-6380 |
Concrete components |
Seating with dowel (75), Two sided seating with dowel (76), Seating with dowel to flange (77), Two sided seating with dowel to flange (78): Previously, component rebars were not always created properly in environments where the rebar size code is not an integer. This issue has now been fixed. |
TSAC-6381 |
Concrete components |
Rebar in beam (90): Previously, component rebars were not always created properly in environments where the rebar size code is not an integer. This issue has now been fixed. |
TSAC-6389 |
Concrete components |
Mesh bars by area: Rebars are now recreated correctly after changing the spacing by using direct modification. |
TSAC-6398 |
Concrete components |
Wall layout: Previously, when modifying openings by using direct modification, the openings were not modified correctly if the main layer did not have an opening. This issue has now been fixed.
|
TSAC-6410 |
Concrete components |
Floor layout: Previously, UDAs with value type float were not converted correctly when the decimal separator in the Windows region settings was set to comma and then changed. This issue has now been fixed. |
TSAC-6428 |
Concrete components |
Floor layout: Minimum end angle now works correctly. Previously, slabs that had skewed ends with less than ~2.5 degrees were not properly straightened or cut. This issue has now been fixed. |
TSAC-6457 |
Concrete components |
Floor layout: Property strips were occasionally created far away from the picked points. This issue has now been fixed. |
TSAC-6458 |
Concrete components |
Floor layout: Previously, floor layout property strips did not work if they were so short that they were completely inside one slab and Hit slab only was selected in Effect in layout. This issue has now been fixed. |
TSAC-556 |
Steel components |
Cap plate detail: The default values of convex arc chamfers in a cap plate used for RHS and SHS profile types have been updated. The default values are no longer hardcoded.
Now, if you define the width and the height of a cap plate, the chamfer radius value of the profile is used. If the profile chamfer radius is equal or smaller than 5 mm, then 0 mm value is applied. If you define the cap plate edge distances, an absolute value of the difference between the profile chamfer radius and the highest value of all edge distances is used. |
TSAC-5650 |
Steel components |
Railings (S77): Previously, the bottom horizontal rail was incorrectly fitted in some situations. This issue has now been fixed. |
TSAC-5978 |
Steel components |
Tube gusset (20): Previously, when you created the component on different planes by using the same settings, the gusset plate geometry could be different in the created components. This issue has now been fixed. |
TSAC-5991 |
Steel components |
Wraparound gusset cross (60): Gusset bolts are now created correctly when using erection clearance for clip angles. |
TSAC-6114 |
Steel components |
Partial stiffened end plate (65): Previously, front plate edge distances from the main part did not work correctly when connecting a beam to a column. This issue has now been fixed. |
TSAC-6119 |
Steel components |
Tapered column-beam stub (150): Previously, ratholes were created with an incorrect shape. This issue has now been fixed. |
TSAC-6187 |
Steel components |
Column with stiffeners W (182): Previously, welds between the stiffeners and tab plate were missing when the secondary part was skewed. This issue has now been fixed. |
TSAC-6202 |
Steel components |
Cast-in plate (1069): Previously, when using double tab plates, one of the tab plates had an incorrect width. This issue has now been fixed. |
TSAC-6239 |
Steel components |
Column splice (132): Previously, incorrect parts were selected as the bolted parts in some situations. This issue has now been fixed.
|
TSAC-6257 |
Steel components |
Splice type 1 (56): Previously, the assembly numbering for parts was not correct. This has now been fixed. |
TSAC-6300 |
Steel components |
Gusset stiffeners (171): Previously, upper and lower stiffeners were not created in some cases. This issue has now been fixed. |
TSAC-6301 |
Steel components |
Shear plate simple (146): Previously, weld backing bars were not created for C profiles with sloped flanges. This issue has now been fixed. |
TSAC-6315 |
Steel components |
Angle profile box (170): Previously, lower angle stiffeners were not created in the correct position. This issue has now been fixed. |
TSAC-6324 |
Steel components |
Bridging (S80): Previously, the number of input parts was limited to 50. This has now been fixed and the number of input parts is now limited to 100 parts, which is the maximum number of input parts in detailing components. |
TSAC-6460 |
Steel components |
End plate (144): Previously, slotted holes in shim plates were incorrectly placed. This issue has now been fixed. |
TSAC-6470 |
Steel components |
Column with stiffeners W (182): Previously, secondary part web and flange weld preparations were not created. This issue has now been fixed. |
TSAC-6482 |
Steel components |
Two sided end plate (34): Previously, the horizontal bolt group offset was incorrectly applied for one of the secondary parts. This issue has now been fixed. |
TSAC-6483 |
Steel components |
Stiffened end plate (27): Previously, shear tab chamfers were also applied for the stiffener. This issue has now been fixed.
|
TSAC-6499 |
Steel components |
Clip angle (141): Previously, the Same bolt length for all bolts option on the Bolts tab was not working correctly. This issue has now been fixed. |
TTSD-49010 |
Steel components |
Previously, you could not select attribute files for some steel components. This issue has now been fixed. |
TTSD-15193 |
Import, export, interoperability |
Reference models: The reference model list now supports saving of empty reference model groups. Previously, when you created a reference model group but did not add any reference models in the group, the group disappeared when you reopened the model. |
TTSD-24407 |
Import, export, interoperability |
IFC4 export: The surface object coloring by object class now works. |
TTSD-40181 |
Import, export, interoperability |
IFC4 export: CUSTOM properties are now supported in the IFC4 export. |
TTSD-44530 |
Import, export, interoperability |
Reference models: The reinforcement objects in IFC reference models are now drawn in full length rather than partially when the Dashed line for hidden line setting has been activated through File > Settings. |
TTSD-47117 |
Import, export, interoperability |
Reference models: Especially for curved IFC objects, like cylinders, the outlines of objects could be missing in drawings when the Outline representation was used instead of Wireframe. This issue has now been fixed. |
TTSD-48204 |
Import, export, interoperability |
Trimble Connect: The reference model update is now optimized when there is a lot of content in the folders, and the update is no longer blocking subsequent actions. |
TTSD-48824 |
Import, export, interoperability |
Point clouds: Points in the point cloud no longer get cluttered at certain angles. |
TTSD-48974 |
Import, export, interoperability |
Trimble Connect: There was an occasional update error after a reference model upload. |
TTSD-49324 |
Import, export, interoperability |
Exporting rebar sets: Rebar set export in model export has been changed so that instead of exporting a complete rebar set, the export is done by groups within the rebar set. |
TTSD-49536 |
Import, export, interoperability |
IFC object conversion: The IFC object conversion now supports materials and the mapping of materials in Conversion as item (B-rep conversion). |
TTSD-49592 |
Import, export, interoperability |
Point clouds: Point clouds are more accurately visualized in certain details. |
TTSD-49708 |
Import, export, interoperability |
IFC object conversion: Now the conversion works better also when IFC object contains boolean parts (boolean adds and cuts). |
TTSD-49922 |
Import, export, interoperability |
IFC4 export: Rebar groups are exported as IfcReinforcingBar, and the export may also contain additional property sets and properties. |
TTSD-50058 |
Import, export, interoperability |
Trimble Connect: When a reference model published from Trimble Connector was deleted remotely, it did not appear in the unpublished reference models list anymore. This issue has now been fixed. |
TTSD-50144 |
Import, export, interoperability |
IFC4 export: Earlier, when you exported template attributes to IFC4, the exported values contained a prefix _. This issue has now been fixed. |
TTSD-50175 |
Import, export, interoperability |
Trimble Connect: Uploading to Trimble Connect by using the Layer names as: Name option is now also supported with rebar sets. |
TTSD-50267 |
Import, export, interoperability |
Project properties: The user-defined IFC export project attributes IFCSITE, IFCBUILDING and IFCBUILDINGSTOREY are now cleared when you save your model by using Save as. |
TTSD-50323 |
Import, export, interoperability |
Reference models in multi-user mode: Undoing a reference model insert in the multi-user mode caused an error note in save. This issue has now been fixed. |
TPLED-228 |
Templates and reports |
Template Editor: Sometimes, the CopyField() value was not retrieved correctly from a row previously output. This issue has now been fixed. |
TPLED-229 |
Templates and reports |
Template Editor: The Valuefield basename was not kept in copying and pasting. This issue has now been fixed. |
TPLED-231 |
Templates and reports |
The ROW_IN_PAGE attribute did not work correctly when a table was filled by using the Fill direction: Horizontal setting. This issue has now been fixed. |
TPLED-235 |
Templates and reports |
Template Editor: Page headers and footers were sometimes missing with the Use columns property set. This issue has now been fixed. |
TPLED-236 |
Templates and reports |
Template Editor: The column gap in tables is no longer too narrow. Note that if column headers or footers were created by a fixed number of columns instead of using the Use columns property, then there can be a misalignment of column borders between cells and column headers or footers. In this case, edit the header or footer definitions by either using the Use columns property, or manually realigning the header or footer content. |
TPLED-237 |
Templates and reports |
Template Editor: Tables were sometimes places too low when multiple pages were used. This issue has now been fixed. |
TTSD-17729 |
Templates and reports |
Template Editor: Horizontal template output now works when the template uses a variable number of columns. |
TTSD-46625 |
Templates and reports |
Previously, the values returned by the template attributes END1_CODE and END2_CODE were not correct for polybeams. This has now been fixed. |
TTSD-49576 |
Templates and reports |
Sometimes, templates were misplaced in the drawing layout when template columns were filled from right to left (the Start from setting was set to Top right or Bottom right in Template Editor row properties). This issue has now been fixed. |
TTSD-49962, TTSD-50166, TTSD-50326 |
Templates and reports |
Previously, when inquiring the top or bottom level of a reinforced cast unit or a cast unit with added material, the levels were reported incorrectly. This has now been fixed. |
TTSD-50858 |
Templates and reports |
Template Editor: Multiple separators now work in the fvf() function. Also leading and trailing spaces are ignored when the key value is searched. |
TSAC-6099 |
Drawings |
View-level dimensioning: The speed of the dimensioning has been improved if grids are not included in dimensioning rules. |
TTSD-30067 |
Drawings |
Welds no longer disappear from drawings when parts are checked for hidden lines. |
TTSD-45316 |
Drawings |
Section marks or labels no longer disappear when you modify a drawing. |
TTSD-47209 |
Drawings |
Earlier, merged weld marks were removed from a view when another view was modified. This issue has now been fixed. |
TTSD-47944 |
Drawings |
Earlier, when unfolding plates having bolt assembly with even or odd slots rotation, slotted hole orientation was incorrect sometimes. This issue has now been fixed |
TTSD-48524, TTSD-45648, TTSD-45638, TTSD-50686 |
Drawings |
When using outline part representation, circular geometry, such as round cuts and arc chamfers, could sometimes be shown incorrectly in drawings. This issue has now been fixed. |
TTSD-49187 |
Drawings |
Some profiles were not shown in drawing section views. This issue has now been fixed. |
TTSD-49988 |
Drawings |
Document manager: Document manager was not able to show file changes for monitored folders if the folder path contained non-Latin characters. This issue has now been fixed. |
TTSD-50232 |
Drawings |
Earlier, when you had set the XS_BOLT_DUPLICATE_IGNORE advanced option to TRUE , certain studs were sometimes considered as duplicates. Due to to this, these studs were not shown in drawing views. This issue has now been fixed. |
TTSD-49911 |
Tekla Model Sharing |
In Tekla Model Sharing, the connection issues diagnostic handling has been improved and the error messages are more detailed. |
TTSD-49051 |
Tekla Model Sharing |
Previously, the sharing history was not always correctly read in. This has now been fixed. |
TTSD-49481 |
Tekla Model Sharing |
In Tekla Model Sharing, the logging for model sharing network failures has been improved. |
TTSD-50241 |
Tekla Model Sharing |
Previously, the sharing history was not always correctly read in. This has now been fixed. |
TTSD-46830 |
Reinforcement |
Rebar sets: Leg faces can now be selected also by clicking on an edge of the leg face. |
TTSD-48832 |
Reinforcement |
The cast unit template attributes for total width (CAST_UNIT_WIDTH_TOTAL ), height (CAST_UNIT_HEIGHT_TOTAL ), and length (CAST_UNIT_LENGTH_TOTAL ) now consider rebar objects created with rebar sets. |
TTSD-48883 |
Reinforcement |
Previously, the bent mesh end hooks with angles greater than 90 degrees had incorrect geometry. This has now been fixed. |
TTSD-49964 |
Reinforcement |
Rebar sets: The context menu now shows the correct adaptivity status of the rebar set modifiers.
Previously, in some cases, a wrong value was shown. |
TTSD-50196 |
Reinforcement |
Rebar catalog: The value of weight per unit length is now correct with the display unit type daN/m. |
TTSD-50299 |
Reinforcement |
Rebar sets: An issue was fixed whereby after using the rebar set layer editing commands, the coupler and end anchor components would sometimes not place those objects correctly. |
TTSD-42973 |
Modeling |
When cast-in-place concrete parts are shown as merged, the tolerance for showing edges between the parts has now been increased from 0.001 to 0.01 mm. This allows tiny misalignments between parts that are forming a common face, without different part segments being separated by edges in the model and in drawings. |
TTSD-43960 |
Modeling |
Previously, the right-click context menu did not show all the commands correctly and Tekla Structures restart was needed to get the menu to work correctly. This has now been fixed.
|
TTSD-45502 |
Modeling |
Previously, the commands to create construction circles, arcs, and polycurves did not follow the setting of the Snap to any position switch. This now has been fixed. |
TTSD-48636 |
Modeling |
Previously, when using the Copy special > All content to another object command, some objects, such as single reinforcing bars, bar groups, and surface treatments, were copied twice. This does not happen anymore. |
TTSD-48745 |
Modeling |
Previously, sometimes when a radial grid had a manually added grid line, the reports of the parts located on the added grid line were showing incorrect part position on the grid. |
TTSD-49529 |
Modeling |
Splitting a part using snapping to intersection points is now working again. |
TTSD-49871 |
Modeling |
Previously, corner chamfers were lost in certain situations when a slab or plate that was placed on a user-created work plane was being split. This has now been fixed.
Additionally, picking points on chamfered plates or slabs on the work plane now works correctly. |
TTSD-49924 |
Modeling |
The lofted plate reference line functionality has been improved to potentially avoid Tekla Structures to stop working unexpectedly. |
TTSD-49952 |
Modeling |
Previously, when the bolt diameter was specified as a decimal number, it might happen that incorrect bolt properties were selected from the bolt assembly catalog. This has now been fixed. |
TTSD-50600, TTSD-50409, TTSD-50701 |
Modeling |
Previously, the user defined commands were not available after Tekla Structures restart. This has now been fixed. |
TTSD-49899 |
Licensing |
The XS_LICENSE_SERVER_HOST setting from bypass.ini was previously ignored. This has been fixed. |
TTSD-42084 |
Core |
Project properties: User-defined attributes related to Geo coordinates have been removed. |
TTSD-48207 |
Core |
Context menu did not always work correctly when at least one reference model was inserted in the model. For example, the snap override commands in the context menu could get stuck after autosave if a modeling command was active at the same time. The only solution was to restart Tekla Structures. This issue has now been fixed. |
TTSD-48626 |
Core |
Previously, when Tekla Structures was opened, it sometimes stopped working unexpectedly. This has now been fixed. |
TTSD-48624 |
Tools and components |
Previously, in some rare cases, Tekla Structures could behave incorrectly or stop working unexpectedly when plugin components were moved or copied. This has now been fixed. |
TTSD-48674 |
Tools and components |
Multi-report generator: The multi-report generator macro now supports several folders in XS_TEMPLATE_DIRECTORY_SYSTEM . |
TTSD-44588 |
Numbering |
The Change part number ribbon command can now be used to change the position number of rebar set bars. The Select single rebars or Select rebar groups selection switch should be used to select the bars required. The Select rebar sets switch cannot be used with the command, because a rebar set may contain bars with many different position numbers. |
TTSD-47301 |
Numbering |
The "Numbering is not up to date" message did not appear when you were opening a single-part drawing that was previously created, it was missing since Tekla Structures 2021. Now the message appears as expected. |
TTSD-48706 |
Numbering |
Previously, some component objects ended up in a wrong assembly after copying. This has now been fixed. |
TTSD-47183 |
Import, export, interoperability (steel) |
NC/DSTV export: Earlier, when using Save as when saving the NC file header content, the resulted file was not loaded properly. This issue has now been fixed. |
TTSD-50204, TTSD-50268 |
Import, export, interoperability (steel) |
NC/DSTV: Earlier, setting the pop-mark location to the center position did not work correctly. This issue has now been fixed. |
TSAC-6059 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): The Bent mesh and reinforcement setting now supports terminal hook types 2 and 3 with options Mesh with hook forms 0-5 and Mesh forms 0-5 or free. |
TSAC-6113 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68): Previously, duplicated weep holes were sometimes exported. This issue has now been fixed. |
TSAC-6142 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): Bent reinf. as unfolded on the Reinforcement tab has been renamed to Bent mesh and reinforcement. A new option, Mesh forms 0-5 or free, has been added.
The options have been renamed as follows: Freely selectable forms (previously No) All as unfolded (previously Yes) Mesh with hook forms 0, 2 and 5 (previously Yes with end hooks) Mesh with hook forms 0-5 (previously Bent meshes with end hooks) Mesh as unfolded (previously Only meshes) |
TSAC-6160 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): Previously, some symbol definition file settings caused the symbol to be offset from the correct location. This issue has now been fixed. |
TSAC-6169 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68): Calculating the location of the weep holes, with the consideration of filled cores, prevented the export to finish correctly. This issue has now been fixed. |
TSAC-6296 |
Import, export, interoperability (concrete) |
BVBS Export: When 2D reinforcing bars had bendings in both directions in recent service packs, the bendings to negative directions were not considered, and were exported as straight sections. This issue has now been fixed. |
TSAC-6319 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68): You can now specify the unit to be used for element dimensions by using the new Unit for element dimensions setting on the Data settings tab. |
TSAC-6335 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68): The ELiPLAN export processes now cut objects better in cases where the objects are misplaced or outside of their associated main part. |
TSAC-6427 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68): Previously, border lines were exported unnecessarily. This issue has now been fixed. |
TSAC-6430, TSAC-5756 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68): Previously, net area was sometimes exported as a negative value, or was exported incorrectly for some elements with certain types of cuts or recesses. These issues have now been fixed. |
TSAC-6442 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68): Exporting hollowcore with an unusually high amount of complex cuts caused the export to crash. This issue has now been fixed. |
TSAC-6454 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68): In some cases, when exporting a narrow hollowcore, the export interpreted the cast unit as a type beam and not as a type slab, which led to incorrect results. This issue has now been fixed. |
TSAC-6471 |
Import, export, interoperability (concrete) |
Export ELiPLAN file (68): Information about the export progress is now shown in a command prompt window. |