Set a reference point to move in one, two, or any direction | - Select the handle in the reference point.
- To define in which directions the handle can move, select an option from the list on the toolbar:
You can also press Tab to cycle through the options. - To move the handle parallel to a certain plane only, clickand select the plane.
| Construction points, lines, circle center points, planes |
Move a point, a point on a line, circle, arc or polycurve, or a plane corner | Drag the handle in the reference point to a new location. | All construction objects |
Move a circle or arc | Drag the handle in the center point to a new location. | Construction circles, arcs |
Move a line or a plane edge | Drag the line handle to a new location. | Construction lines, planes |
Move a plane | Drag the plane to a new location. | Construction planes |
Show or hide diagonal dimensions | - Select a handle.
- On the toolbar, click.
- Click the eye button to show or hide orthogonal and total dimensions:
| Construction lines, planes |
Change a dimension | Drag a dimension arrowhead to a new location, or:- Select the dimension arrowhead which you want to move.
To change the dimension at both ends, select both arrowheads. To change the radius of a circle or arc, select the outer arrowhead. - Using the keyboard, enter the value with which you want the dimension to change.
To start with the negative sign (-), use the numeric keypad. To enter an absolute value for the dimension, first enter $, then the value. - Press Enter , or click OK in the Enter a Numeric Location dialog box.
| Construction lines, circles, planes Arcs (numeric input only) |
Chamfer a polycurve corner | - Select a corner handle.
- On the toolbar:
- Clickto create a rounded chamfer, and then enter the chamfer radius.
- Clickto create a straight chamfer, and then enter the chamfer dimensions X and Y.
- Press Enter to confirm the chamfer dimensions.
| Polycurves |
Change an arc to a line Make a curved segment straight | Select the arc or segment midpoint handle (with an arc symbol)and press Delete. | Arcs, curved polycurve segments |
Change a line to an arc Make a straight segment curved | Drag the arc symbolat the midpoint of the line or segment. | Lines, straight polycurve segments |
Add a corner point and an intermediate segment to a polycurve | Drag a segment midpoint handle to a new location. | Polycurves |
Remove a corner point and the two connected segments | Select the corner point handle and press Delete. | Polycurves |
Remove the last polycurve segment | Select the end point handle and press Delete. | Polycurves |
Change the radius of an arc and keep the end point locations | Click the radius dimension, enter a new value, and press Enter. | Arcs |
Change the radius of a polycurve segment and keep the end point locations | Drag the arc symbolat the segment midpoint handle. | Curved polycurve segments |
Change the angle or length of an arc | Drag the start or end point to a new location. | Arcs |
Copy a construction object using offset | See Copy a construction object with offset. | Lines, circles, arcs, polycurves |