On this tab, you can add data attributes only, no geometric attributes. The attributes are either optional or obligatory. The length of some of the fields may be limited in the UT format, so keep the strings short.
Depending on the setting, the following attributes can be added: Project number , Project name , Cast unit position , Cast unit position code , Assembly control number (ACN) , Cast unit ID , Cast unit prefix (2 digits) , Cast unit drawing revision mark , Project properties - name , Project properties - address , File name with extension , File name without extension , Tekla Structures version , Main part ID , Project UDA , Main part UDA , Main part UDA (UT_product_code) , Phase , User-defined text , User name , Main part template , Template and Text[Template]#Counter.
Text[Template]#Counter :
- Text can be any text including punctuation marks.
- Write templates in brackets [].
- # adds a running number if the data content is the same in several entries.
- You can enter several templates and use text delimiters.
- If you start the Text[Template]#Counter with a template, add a space as the first character before the bracket.
- Template attributes are read from the main part.
- You can also use attributes that refer to another hierarchy level.
- You can use <VALUE> to inquire a part UDA and {VALUE} to inquire an assembly UDA. This makes it possible to use a shorter string instead of having to use a template property to designate UDAs.