Add dimensions to unfolded parts
In single-part and assembly drawings, you can control the dimensions Tekla Structures adds for unfolded parts that have been created using : Yes.
Use the advanced options in
.
To |
Do this |
---|---|
Create bending line dimensions for unfolded parts. |
Set the advanced option
|
Create angle and radius dimensions for unfolded parts. |
Set the advanced option
|
Set a prefix text for an angle dimension. |
Set the advanced option
|
Set a prefix text for a radius dimension. |
Set the advanced option
|
For angle text dimensions, show the interior angle instead of the exterior angle. |
Set the advanced option
|
Set the format for angle text. |
Set the advanced option
###= 0 ###[.#]= 1 ###.#=2 ###[.##]= 3 ###.##= 4 ###[.###]=5 ###.###= 6 ### #/#= 7 ###/##.###= 8 |
Set the accuracy of the angle text. |
Set the advanced option
0.00= 1 0.50= 2 0.33= 3 0.25= 4 1/8= 5 1/16= 6 1/32= 7 1/10= 8 1/100= 9 1/1000= 10 |