CRANK_SIDE_START
CRANK_SIDE_END
|
Shows to which side of the splitter the crank is created at the start or end of the bar: Left or Right.
|
CRANK_ROTATE_START
CRANK_ROTATE_END
|
Shows to which angle the crank is rotated at the start or end of the bar.
|
CRANK_STRLEN_START
CRANK_STRLEN_END
|
Shows the length of the straight segment of the crank at the start or end of the bar.
This is (2) in the image above.
|
CRANK_LENTYPE_START
CRANK_LENTYPE_END
|
Shows the type of the cranked length at the start or end of the bar: Diagonal ratio , Diagonal distance , Horizontal ratio , Horizontal distance.
|
CRANK_RATIO_START
CRANK_RATIO_END
|
Shows the multiplier of the bar diameter that is used to define the cranked length at the start or end of the bar.
|
CRANK_DIST_START
CRANK_DIST_END
|
Shows the length of the cranked segment at the start or end of the bar.
If the cranked length type is Horizontal distance , this is (3) in the image above.
If the cranked length type is Diagonal distance , this is (4) in the image above.
|
CRANK_OFFSET_START
CRANK_OFFSET_END
|
Shows the offset distance of the straight segment of the crank at the start or end of the bar.
This is (5) in the image above.
|