XS_CS_CHAMFER_DIVIDE_ANGLE
Category in Advanced options dialog box: Speed and accuracy
Use this advanced option to change the angles
dividing a cross section chamfer. The default value is 30.0 degrees.
Note:
A very small value will cause profile roundings not to be visible.
Using this advanced option affects the rounding radius for parts that have high accuracy (for example parts in drawings and in DWG export).
This advanced option is model specific and the setting is saved in the options database.
Example
XS_CS_CHAMFER_DIVIDE_ANGLE=10.0
Tip:
When you want to export B-rep as exact solids in the IFC export, you need to set
the advanced option XS_EXPORT_BREP_AS_EXACT_SOLID to TRUE. To get smoother edges to the export, set
XS_CS_CHAMFER_DIVIDE_ANGLE to 10.