XS_THICKNESS_PARAMETER_IS_CROSS_SECTION_THICKNESS
Category in Advanced options dialog: Profiles
Use this
advanced option to define the method to measure the thickness of parts (flanges,
plates, walls and so on). When set to FALSE, the thickness
parameter of the profile defines the actual thickness. When set to TRUE, the thickness
parameter defines the cross section thickness (which is not same as the actual
thickness if the part is sloped).
The default value is FALSE. We recommend that you use this value.
The change applies to the following profile types:
-
SPD
-
EPD
-
I
-
RHS
-
PD
-
P