Add revision marks in drawings

Tekla Structures
2021
Tekla Structures

Add revision marks in drawings

Revision marks are symbols that you can add in the drawing when you want to indicate a change in the Tekla Structures model or drawing, and the objects that have changed. Tekla Structures creates the revision mark using the properties in the Revision Mark Properties dialog box.

  1. Open a drawing.
  2. On the Annotations tab, click Revision mark and select one of the following commands:
    • Add revision mark
    • Pointing to left
    • Pointing to right
    • Along line, pointing to left
    • Along line, pointing to right
  3. Enter the mark, date, and information on the changes.

    Tekla Structures shows this information in the revision table of the drawing.

  4. To place the revision mark exactly in the position you pick and keep it there, click the Place... button and select fixed in the Placing list.
  5. Go to the Appearance tab and set the text color, height, font and angle, the frame color, leader line and type, and the leader line arrow type and size.
  6. Click OK or Apply.
  7. Pick a point or points to place the mark.

    Tekla Structures creates the revisions and revision marks. You can also see the new revisions in Document manager.

    To delete any unnecessary revision marks, select the marks and press Delete on the keyboard.

See below for examples of revision marks.

Note that if you want to create revisions of drawings, use the Revision command in Document manager. Note that creating revisions using the Revision command will not create any marks inside the drawing. For more information about creating revisions, see Revise drawings.

Var det här användbart?
Föregående
Nästa