Mark series of the strand.

User-definable name of the strand.

Tekla Structures uses strand names in reports and drawing lists, and to identify strands of the same type.

Steel grade of the strand.

Diameter of the strand.

Depending on the environment, the nominal diameter of the strand, or a mark that defines the diameter.

Internal radius of the bends in the strand.

You can enter a separate value for each bend. Separate the values with spaces.

Use to group reinforcement.

For example, you can display strands of different classes in different colors.

Pre-stress load per strand (kN).

Number of cross sections of the strand pattern.

For example:

• Number of cross sections along strand profile = 1:

  

• Number of cross sections along strand profile = 2:

  

• Number of cross sections along strand profile = 3:

  

• Number of cross sections along strand profile = 4:

  

In this double-tee beam, the number of cross sections is 4:

From start

Middle to start

Middle to end

From end

Enter the length of the debonding.

If you select the Symmetry check box, values from From start and Middle to start are copied to From end and Middle to end.

You can create user-defined attributes to add information about reinforcement. Attributes can consist of numbers, text, or lists.

You can use the values of user-defined attributes in reports and drawings.

To set values for user-defined attributes, click the User-defined attributes button.

You can also change the name of the fields, and add new ones, by editing the objects.inp file. See Define and update user-defined attributes (UDAs).