Standard files

Tekla Structures
2020
Tekla Structures

Standard files

Standard files are property files that Tekla Structures uses by default when you apply commands.

The standard properties are displayed in the property pane of different model objects, such as beams, columns or plates, or in the dialog boxes of, for example, drawing objects.

How to take standard files into use

  • In the property pane: the properties are loaded when you select the standard option in the upper part of the property pane. The properties are in use immediately.

    If the values that you loaded are different from the previous values, the property pane highlights the modified properties.

  • In dialog boxes: the properties are loaded when you select the standard option in the list next to the Load button, and click the Load button.

Standard files are named standard.* where the symbol * is the file name extension. For example, standard.clm file is used for steel column properties. The user-defined attributes are saved with the standard files as *.morefiles. For example, standard.clm.more file is used for steel column user-defined attributes.

Tekla Structures reads the default standard files from the environment's system folder.

Save a set of standard files

If needed, you can save a set of standard files in the current model's \attributes folder.

You can then copy the standard files to the project folder or the firm folder for future use, to set up Tekla Structures to suit the way you work.

  1. To save a set of standard files, go to Quick Launch.
  2. Start typing save defaults.
  3. Select the Save defaults command from the list.

    Tekla Structures saves the following list of standard and *.more files in the ..\TeklaStructuresModels\<model_name>\attributes folder:

    File

    Property

    standard.bpl

    standard.bpl.more

    Bent plate properties

    standard.clm

    standard.clm.more

    Steel column properties

    standard.cpl

    standard.cpl.more

    Contour plate properties

    standard.crs

    standard.crs.more

    Orthogonal beam properties

    standard.dia

    standard.dia.more

    Twin profile properties

    standard.fms

    standard.fms.more

    Plotting frames

    standard.fpl

    standard.fpl.more

    Folded plate properties

    standard.ipc

    standard.ipc.more

    Concrete item properties

    standard.ips

    standard.ips.more

    Item properties

    standard.ler

    standard.ler.more

    Layer properties

    standard.mvi

    standard.mvi.more

    Model view properties

    standard.num

    standard.num.more

    Numbering setup

    standard.prf

    standard.prf.more

    Project properties

    standard.prt

    standard.prt.more

    Steel beam properties

    standard.scr

    standard.scr.more

    Bolt properties

    standard.wld

    standard.wld.more

    Weld properties

  4. If you want to load the default property settings from the standard files that are saved in the attributes folder, go to Quick Launch and use the Load defaults command.

Create user-defined standard files

You can also create your own standard files. Tekla Structures saves the user-defined standard files in current model’s \attributes folder.

  1. To save a user-defined standard file, open the property pane or a dialog box whose properties you want to save as a standard file.
  2. Modify or enter the properties.
  3. Save the properties.
    • In the property pane: enter standard as the name , and click .
    • In a dialog box: in the box next to the Save as button, enter standard as the name , and click Save as.

    Tekla Structures saves the standard file and the related *.more file in the current model’s \attributes folder. If a standard file with the same file name extension exists in the in the \attributes folder, Tekla Structures overwrites the previous file.

  4. When you want to load the standard file, select it from the list of the property files in the property pane or in a dialog box.

    Alternatively, to load the default property settings from the standard files that are saved in the attributes folder, go to Quick Launch and use the Load defaults command.

Var det här användbart?
Föregående
Nästa