View model status in the Project Workspace

Tekla Structural Designer
2021
Tekla Structural Designer

View model status in the Project Workspace

The Status tree is used to review the validation messages and other model status indicators.

You can review:

  • The validation status for the model

    For more information, see: Validate the model

  • The validation status for the analysis

    The analysis model validation is performed automatically when you analyze the model.

  • The decomposition status

    The Decomposition branch shows if load decomposition has been successfully completed.

  • The solver status

    The Solver branch lists the analyses that have been performed.

  • The BIM validation

    If the model has been imported or exported, the BIM branch lists any warnings and errors that relate to the import or export process.

  • The status of drift, sway, wind drift, seismic drift checks and displacements

    Each of these are reported automatically when the appropriate analysis has been performed. For more information, see: Check drift, sway, seismic drift, wind drift, and overall displacements

Note:
  • indicates that the analysis or process has been successfully completed.

  • indicates that the analysis or process has resulted in an error.

  • indicates that the analysis or process has resulted in a warning.

Was this helpful?
Föregående
Nästa