Review foundation and pile design

Tekla Structural Designer
2020
Tekla Structural Designer

Review foundation and pile design

Review foundation or pile status

  1. Open a view and change the view regime to Review View.
  2. Go to the Review ribbon.
  3. Either in the Foundations group or the Piles group, click Status.

    Color codes display the design status of each foundation or pile.

    Tekla Structural Designer uses the following classifications:

    Status

    Description

    Pass

    The foundation or pile has passed all design checks.

    Fail

    The foundation or pile has failed one or more design checks.

    Warning

    Although the foundation or pile has passed the design checks, one or more warnings have been issued. Review the warnings before deciding if you need to take further action.

    Error

    The foundation or pile currently cannot be designed because an error has occurred.

    Beyond Scope

    The foundation or pile cannot be designed because its design is beyond the scope of Tekla Structural Designer.

    Unknown

    The foundation or pile has not been designed.

Review foundation or pile ratios

  1. Open a view and change the view regime to Review View.
  2. Go to the Review ribbon.
  3. Either in the Foundations group or the Piles group, click Ratio.

    Color codes display the design ratio of each foundation or pile. N/A is assigned to members that have no ratio or whose ration is smaller than the lowest band. N/A also indicates foundations and piles that are either beyond scope or have yet to be designed.

Var det här användbart?
Föregående
Nästa