Denna version av produktdokumentationen har arkiverats och uppdateras inte längre.

Tekla Structural Designer

2020

Tekla Structural Designer

Design models

From the Design toolbar you can batch design all the members and walls in your model and (separately) batch design all the slabs. From the same toolbar you can also check the response of floors to dynamic excitation.

As an alternative to batch design you might choose to selectively design parts of the model as required.

To get to know about combined analysis and member design and selective member design, see:

Design steel members and cast-in-place concrete beams, columns and walls

To design slabs, see

Design slabs and run punching shear checks

If working to either the Eurocode or US headcode, you may also want to introduce more/less conservatism to the design process by specifying user defined utilation ratios:

Apply user defined utilization ratios

To check the response of floors to dynamic excitation, see:

Create and run floor vibration checks

Note: Foundation design topics are covered separately, see Create and design foundations

Certain member types can be designed using Tekla Tedds, see:

Design timber and precast members using Tekla Tedds

Steel member design handbook

Vibration of floors to DG11

Vibration of floors to SCI P354

Föregående

Nästa