Color-code production control items in the IFC model

Tekla PowerFab
2021
Tekla PowerFab Tekla PowerFab GO

Color-code production control items in the IFC model

To color-code items in the IFC model according to their properties, use the Colorize command in the Model Viewer Interface dialog box. For example, you can color-code items according to their production status or sequence. You can also set filters to only color-code particular items in the model. By using a filter, for example, you could first filter the items by their sequence, and then color-code the items in that sequence by their production status.

  1. In the Production Control dialog box, right-click anywhere in the display area.
  2. In the context menu, click Model Interface.
  3. If necessary, in the Model Viewer Interface dialog box, filter the items that you want to color-code:
    1. Click Set Filters.
    2. In the Estimating Filters dialog box, select a filter type in the Type list, and click Select.
    3. In the Filter dialog box, do one of the following depending on the filter type:
      • Click the arrow buttons to move the items that you want to display in the model to the Included list.

      • Type the maximum and minimum values for the items that you want to display in the model.

    4. Click OK.

      Repeat steps b to d for all filter types that you want to set.

    5. Click Apply Filter.
  4. Click the arrow on the right side of the Colorize By list and select a property in the list.
  5. Click Colorize.

The items in the IFC model are color-coded according to the selected property.

To revert to the original colors in the IFC model, click Reset in the Model Viewer Interface dialog box.

Var det här användbart?
Föregående
Nästa