Weld preparation (44)
Connects two beams of I profile with welds. You can shape the secondary beam end with rat holes and other weld preparations. The only allowed beam profile is I-profile.
Objects created
-
Welds
-
Fitting
-
Cuts to shape the beam end
Use for
|
Situation |
Description |
|---|---|
|
|
Beam welded to a beam web. Rat hole at the bottom. |
Before you start
Create two beams.
Selection order
- Select the main part.
- Select the secondary
part.
The connection is created automatically when the secondary part is selected.
Picture tab
Use the Picture tab to define the connection geometry.
Dimensions
| Description | Default | |
|---|---|---|
| 1 |
Vertical tolerance. Tolerance between the main part web and the secondary part flange. |
0.2*secondary part flange thickness |
| 2 |
Flange horizontal tolerance. Horizontal tolerance between the secondary part and the main part upper flange. |
3 mm |
| 3 |
Web upper vertical tolerance. Vertical distance between the secondary part upper edge and the top of the web. |
|
| 4 |
Web lower vertical tolerance. Vertical distance between the secondary part lower edge and the bottom of the web. |
|
| 5 |
Flange horizontal tolerance Horizontal tolerance between the secondary part and the main part lower flange. |
3 mm |
| 6 |
Web horizontal tolerance. Tolerance between the webs of the beams. |
0 mm |
Parameters tab
Beam end shape
| Description | |
|---|---|
| 1 |
Web chamfer Dimensions of the top and bottom chamfers in the secondary part web. |
| 2 |
Top and bottom flange straight distance. |
| 3 |
Top and bottom weld access hole radius. |
General tab
Click the link below to find out more:
Design tab
Click the link below to find out more:
Analysis tab
Click the link below to find out more:
Welds
Click the link below to find out more: