Use the Layout Point tool in the Applications & components catalog to create layout points. The layout points that you create in the model are
design points that you can export to use in a layout device, such as Trimble® LM80.
Before you start, ensure that the
Select components
selection switch is activated.
-
In the
Applications & components catalog, double-click the
Layout Point tool.
-
Define the layout point properties on the
Parameters tab:
-
Enter a name and a description for the layout point.
You can use the following special characters in layout point names:_ ~ % ! @ # & . = + - and
space.
Note that the maximum length of the name is
16 characters if you export layout data to .cnx, .tfl, and
.tflx formats. When exporting to
a text file (.txt) or a CSV file
(.csv), there is no limitation
in the number of characters in the name. The maximum length of the
description is 24 characters.
If you do not enter a name, Layout manager adds a number as the name.
-
Enter the diameter of the layout point in the
Size box.
Layout manager uses the
XS_IMPERIAL
advanced option to determine the units. Set
XS_IMPERIAL
to
TRUE to show imperial units.
-
Select whether the layout point is a reference point or not.
A reference point is a mapping point to another coordinate system, such as a geo-spatial coordinate system or a municipal monument.
-
Select a color for the layout point.
-
Select a shape for the layout point.
-
Enter a name for the part that the Layout Point tool creates in the model.
-
Select a group from the list or create a new group by entering a name.
For imported points,
Is Stakeout Point shows if the point is a
measured point as staked in the Trimble® LM80 device if it deviates from the corresponding layout point created in the model.
Is Field Point shows if a point is a field point that has been measured on the construction site and imported to
Tekla Structures.
-
Select a location for the layout point in the model.
The layout point is created when you select the location.
-
On the
Manage tab, click
Layout manager.
-
Click
Refresh
to show the added point.
Tip:
You can also add a layout point to a group in
Layout manager. First select a group, then select the point in the model. Right-click the group and select
Add Selected. Click
Refresh
to show the point.
Tip:
To zoom to a layout point in the model,
right-click the point in Layout manager and select Zoom selected.
To highlight a layout point in Layout manager, click in Layout manager and select Highlight selected model point. Select Redraw to remove the highlighting.