Column Doglegs

CATALOG NAME: Column Corner Reinforcement; Column Face Reinforcement


Column Corner Reinforcement
TYPE: DETAIL

1.  Select the Column Corner Reinforcement tool from the Component Catalog
2.  Fill out component dialog per your requirements
3.  Select the desired column(s) to insert

Bar Information Tab



1.  Straight length of bar after the dogleg bend
2.  Vertical rise of dogleg bend
3.  Distance from top of column to start of dogleg bend
     1.  For a splice located near the middle of column, value can be negative
4.  Run of the dogleg bend
5.  Position of the bar from concrete edge to CL of bar
6.  Bottom end clearance

Column Face Reinforcement - Back to top
TYPE: DETAIL

1.  Select the Column Face Reinforcement tool from the Component Catalog
2.  Fill out component dialog per your requirements
3.  Select the desired column(s) to insert

Bar Information Tab



1.  Straight length of bar after the dogleg bend
2.  Vertical rise of dogleg bend
3.  Distance from top of column to start of dogleg bend
     1.  For a splice located near the middle of column, value can be negative
4.  Run of the dogleg bend
5.  Bottom end clearance

Placing Information Tab



1.  Create Side “X”- Decides whether bars will be created for the specified side
2.  Edge Clearance- Cover distance from edge to first vertical bar
3.  Bar Spacing- Desired spacing of face bars
     1.  You can put in variable spacing if necessary (ie. 3*3” 1’-0” 3*3”)
4.  Perimeter Cover- Cover distance for bars, same distance for all sides

Considerations: 

• Side A will not always be the top side of the column, as the location will depend on the rotation value that the User inserts the column with.
• At this time, doglegs cannot be added to the bottom of the bars

---

Starting in v21.1, the above Custom Components are available in all US Environment Model Templates

• CIP-Rebar Detailing*
• Engineering
• Precast Detailing (hidden)
• Steel Detailing (hidden)