Horizontal Brace

Tekla Structures
2021
Tekla Structures
2020
Tekla Structures
2019i
Tekla Structures
2019
Tekla Structures
2018i
Tekla Structures
2018
Tekla Structures
Environment
Not environment-specific

Contents

Purpose and description
System Requirements
Using the Horizontal Bracing
Horizontal Bracing settings
Additional information

Purpose and description

A component to easily and quickly add a horizontal bracing to a transmission tower.

System requirements

Tekla Structures.

Using [extension]

To use the component:
  1. From the component catalog select the Cross_Bracing_Type_2 component.
Image
HBThumbnail.jpg

  1. Select the parts in the model (2 No.)
Image
Cross_Partsl.jpg

  1. Select the input points
Image
Cross_Points.jpg

Horizontal Brace settings

Parameters Tab

Image
HBDialog.jpg


PropertyDescription
Image
HBBM.jpg
The Gauge Line dimensions of the profiles are read automatically from the GaugeLines.dat file (in the model, firm or system folder).
These can be over written by the user if necessary.
Image
HBType.jpg
Option to specify the input orientation, direction an dtype for the horizontal brace.
The component is expecting equal L profiles or U profiles.
Other profiles will give an incorrect result.
Image
HBOffset.jpg
Options to offset the brace vertically or from the leg face.


Additional information

  • The Component direction must be set according to the directions shown in the dialog before applying
Была ли эта информация полезной?