2018 SP11: New features and improvements

Tekla Structures
2018
Tekla Structures

Исправлений

Номер дефекта Район застройки Описание
TSAC-3556 Concrete components Embedded anchors (8): Previously, only concrete parts have been taken into calculations when using the Assembly without steel parts option on the Placement tab. This has now been fixed and miscellaneous parts are also considered.
TSAC-2363 Steel components Cold rolled overlap (1): Previously, the default position for bolts did not work correctly and the bolt group was not created centered on the profile. This has now been fixed.
TSAC-3436 Steel components Purlin 1 (61): Previously, the bolts did not bolt all input parts in some situations. This has now been fixed.
TSAC-3713 Steel components Central brace tube conn Pl (50): Previously, there was a gap between the connection plate and gusset plate when using the component to connect only one secondary part. This has now been fixed.
TSAC-3744 Steel components Column - 2 beam (14): Previously, the plate between the column and beams was created incorrectly when the bolt offset from the plate center line was specified. This has now been fixed.
TSAC-3829 Steel components Two sided clip angle (143): Previously, when the bolt dimensions on the BoxPBolts tab were smaller than the bolt dimensions on the BoxSBolts tab, the angle boxes were created incorrectly. This has now been fixed.
TSAC-3925 Steel components Stairs (S71): Previously, the error message "Illegal input" was shown even when the component was created correctly. This has now been fixed.
TSAC-3967 Steel components Stair base detail (1038): Previously, all welds in the component were created twice in the same place. This has now been fixed.
TSAC-4011 Steel components Splice connection (77): Welds between the deck plates and input parts now have the correct direction.
 
TTSD-33697 Import, export, interoperability Trimble Connector: You can now upload the same .skp reference model to Trimble Connect with a different name.
TTSD-34022 Import, export, interoperability Tekla Structures now supports Sketchup version 2020.
TTSD-34274 Import, export, interoperability Drawing DWG export is now more robust with symbol handling.
TTSD-34865 Import, export, interoperability IFC object conversion: All parametric C profile start and end points have now been switched. Earlier, they were incorrectly oriented after being converted to Tekla Structures parts.
TTSD-34954 Import, export, interoperability IFC2x3 export: The export sometimes used incorrect object colors when exporting using representation. This has now been fixed.
TTSD-33080 Templates and reports Template Editor: The CopyField() function now works correctly when used with multilevel hidden rows
TTSD-33291 Templates and reports Reports are now created a lot faster than before.
TTSD-33313 Templates and reports Template Editor: When a geometry object was edited in a template that also contained a picture object, the performance was poor, and the more you zoomed in, the worse the performance became. This has now been fixed.
TTSD-34112 Templates and reports Now when you resize a component by dragging the upper or lower handle, all object positions remain the same relative to the opposite side of the dragged handle. So if the top handle is dragged, the object remains in the same position relative to the bottom of the component.
TTSD-34611 Templates and reports In Template Editor, the Reset button was missing from the Picture Properties dialog box. This has now been fixed.
TTSD-28502 Drawings Adding surface treatment marks manually now works more reliably.
TTSD-33642 Drawings Adding revisions to drawings with tables that contain the NUMBER attribute now works correctly.
TTSD-33730 Drawings UDAs were not loaded to the drawing properties dialog boxes if the User-defined attributes section in the properties dialog box had not been opened first. This has now been fixed.
TTSD-33788, TTSD-33790 Drawings Manually created detail marks can now be:
- moved using Shift+drag
- copied using Ctrl+drag

Note that the detail marks can only be moved or copied within a view. When moved beyond the view frame, the view frame will adjust so that the detail mark will always be within it.
TTSD-34370 Drawings When dimensioning type Overall was used in section views, Tekla Structures created duplicate views with same section mark. Now this has been fixed and there is only one A-A view visible, for example.
TTSD-34381 Drawings Tekla Structures occasionally crashed when drawing bolt dimensions. This has now been fixed.
TTSD-34521 Drawings The Undo command now works more reliably for curved dimensions.
TTSD-34609 Drawings

Manually created section marks can now be:

• moved using Shift+drag

• copied using Ctrl+drag

Note that the section marks can only be moved or copied within a view. When moved beyond the view frame, the view frame will adjust so that the section mark will always be within the frame.

TTSD-39590 Drawings Detailed object level settings now automatically update the drawing after a part has its attributes or phase changed. Previously, detailed object level settings were only updated after a part was created, modified or numbered.
TTSD-42726 Drawings Tekla Structures application error no longer occurs when you inquire a rebar set in a drawing.
TTSD-30977 Tekla Model Sharing In Tekla Model Sharing, importing or exporting parametric user-defined profiles in the .lis format is no longer possible without a subtype. This will prevent creating broken or incorrect files.
TTSD-32744 Tekla Model Sharing Previously, changes made in the rebar catalog were not included in write-out packets, if the changed rebars were only used in rebar sets in the shared model. This has now been fixed, so that all rebar catalog changes are included in write-out packets.
TTSD-34133 Tekla Model Sharing When a shared model is read in, and Tekla Structures sets the rebar numbering in drawings as not up to date because of numbering conflicts, the part numbering and the cast unit numbering are now also set as not up to date.
TTSD-35246 Tekla Model Sharing Previously, when you modified drawing properties in a shared model, the changes list could sometimes be disabled. This has now been fixed.
TTSD-13154 Reinforcement The visualization of curved and circular reinforcing bars containing hooks has been improved where previously the hook bending was not correctly represented.
TTSD-29779 Modeling Previously, option type UDAs could only have 50 options in the list of options. This issue appeared when using the side pane, Organizer, or in the Open API. Now option type UDAs can have 400 options.
TTSD-32798 Modeling When you selected assembly objects using the ALT key and the assembly contained a macro, inquiring the center of gravity caused Tekla Structures to crash. This does not happen anymore.
TTSD-33341 Modeling Previously, setting the work plane could in some cases cause small deviations in the accuracy of work plane coordinates. This has now been fixed.
TTSD-34291 Modeling The notifications.xml file is now again saved in the <user>\AppData\Local\ folder.
TTSD-34345 Modeling Previously, Tekla Structures could crash in some cases related to polygon welds. This has now been fixed.
TSAC-4023 Import, export, interoperability (concrete) Export Unitechnik (79): Now, when there are multiple wire sizes in the same layer for the same direction of wires in the STEELMAT block, they are exported with the same concrete cover (the same Z coordinate offset).
TSAC-4024 Import, export, interoperability (concrete) Export Unitechnik (79): Previously, some meshes, on a slightly inclined plane compared to pallet plane, were not correctly rotated to the pallet plane with option Meshes export: Turned to pallet. This has now been fixed.
Была ли эта информация полезной?