Tekla Tedds Engineering Library (October 2019)

Tekla Tedds
Tekla Tedds for Word
2019
Tekla Tedds Tekla Tedds for Word
Environment
Eurocode
USA
Materials
Masonry
Steel

Important

Service Pack 3 is required to use the Tedds Engineering Library (September 2019) or later.

Back to top

UK and Asia

Crane gantry girder design (EN1993)

New calculation which checks the design of a simply supported gantry girder comprising of either a plain I section, an I section with a capping plate or an I section with a capping channel, carrying a conventional overhead or an underslung travelling crane. In accordance with EN1993 and the national annex for the UK, Singapore, Finland, Sweden, Norway or the recommended Eurocode values.

Other updates

Steel simple connection design (EN1993)

[TEDDS-3476]1 Fixed not being able to pre-define steel sections.

Back to top

USA

Steel joist design (SJI)

Enhanced in accordance with the SJI 44th edition and now includes load combinations for IBC 2015, IBC 2018, and ASCE 2016. The user interface has also been improved and more flexibility has been added for the output options including user defined notes and a summary table.

Other updates

Steel joist design (SJI)

Corrected note for maximum span within scope of calculation. Corrected small error with K series LRFD 43rd edition returning conservative values for 20 ft spans.
[TEDDS-618]1 Corrected ‘divide by zero error’ where selected span was outside calculation scope.
[TEDDS-891]1 Added missing 28K9 to available joist list.

Masonry wall panel design (TMS/MSJC)

[TEDDS-932]1 Corrected small output error for walls designed to ASD with in plane shear.
[TEDDS-946]1 Corrected tensile strain factor for out of plane flexure to always equal 1.5.
[TEDDS-944]1 Corrected undefined ‘A_{s_minE}’ variable error.
[TEDDS-933]1 Clarified notes on construction of interaction diagram.
Corrected undefined variable error for walls design to MSJC-05.

RC pile cap design (ACI318)

[TEDDS-3751]1Fixed undefined variable error 'x_{p1}' when re-calculating a document where the pile locations have been manually modified.

Back to top

Australia

No updates

Back to top

Canada

No updates

Back to top

Europe

Crane gantry girder design (EN1993)

New calculation which checks the design of a simply supported gantry girder comprising of either a plain I section, an I section with a capping plate or an I section with a capping channel, carrying a conventional overhead or an underslung travelling crane. In accordance with EN1993 and the national annex for the UK, Singapore, Finland, Sweden, Norway or the recommended Eurocode values.

Other updates

Steel simple connection design (EN1993)

[TEDDS-3476]1 Fixed not being able to pre-define steel sections.

Footnotes

1 This number is an internal reference number and can be quoted to your local Support Department should further information on an item be required.

Back to top
Esta informação foi útil?