Define flat bar sizes with the Fltprops.inp file

Tekla Structures
2018
Tekla Structures

Define flat bar sizes with the Fltprops.inp file

Use the Fltprops.inp file, located in ..\ProgramData\TeklaStructures\<version>\environments\<environment>\profil , to define flat bar thickness, width and material.

Note:

Copy the Fltprops.inp file to a model, project or firm folder and then modify the file in the new location as required.

The first row in the file contains flat bar material definitions (enclosed in quotes " ") followed by plate thicknesses. If you do not define a material, you can use all materials for all flat bars. The following rows define the widths of available flat bars.

The units are millimeters.

Example

Fltprops.inp contains the following data:

With the above data, Tekla Structures displays the following plates as flat bars:

Plate

Material

5x40, 5x45, 6x50, 6x55

All materials

8x60, 8x65, 10x70, 10x75

S235

10x100, 10x110, 15x200, 15x220

S275J0

The flat bars get the prefix that is set in the XS_​FLAT_​PREFIX advanced option.

Esta informação foi útil?
Anterior
Seguinte